Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6511 (64 Sink/Source Inputs)

Low-Cost Industrial Digital Input -- 30 V, Bank Isolated

Configure Page for: Print PDF Rich Text
  • Low-cost solution with advanced features for industrial control and manufacturing test applications
  • 64 sink/source inputs (±30 VDC)
  • Optical isolation in banks of eight channels
  • High-reliability industrial feature set
  • Guaranteed industrial 24 V logic thresholds, change detection, programmable input filters
  • NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.2 and higher)
View Data Sheet


The National Instruments PCI-6511 board is an industrial 64-channel isolated digital input interface for PCI. The NI PCI-6511 has 64 digital inputs with isolation provided in banks of eight channels. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET). Learn more about low-cost industrial data acquisition technologies from NI!

View Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Name PCI-6511
Product Family Digital I/O
Form Factor PCI
Part Number 778966-01
Operating System/Target Real-Time , Linux , Windows
Measurement Type Digital
Isolation Type Bank Isolation
RoHS Compliant Yes
Analog Input
Channels 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0
Input-Only Channels 64
Output-Only Channels 0
Timing Software
Logic Levels 24 V
Input Current Flow Sinking , Sourcing
Programmable Input Filters Yes
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range 0 V - 30 V
Counter/Timers
Counters 0
Physical Specifications
Length 14.1 cm
Width 11.4 cm
I/O Connector 100-pin female 0.050 D-type
Timing/Triggering/Synchronization
Synchronization Bus (RTSI) No

NI PCI-6511 Complete Package

Each NI PCI-6511 requires:
1 Connector Block 1 Cable NI PCI-6511 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6511 and Accessories

Hardware Subtotal: $ 918
NI PCI-6511 - 778966-01 Qty $ 392 each
Connector Block - Screw Terminal
SCB-100 - 776990-01
Qty $ 330 each
Cable - Shielded
SH100-100-F Cable (2m) - 185095-02
Select length:
Qty $ 196 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0
Note : You should only purchase this device without software if you already own compatible application software.
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Estimated Shipping Days: 5 - 10
Package Price: $ 918
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »