- 32 digital I/O lines (5 V TTL/CMOS)
- 8, 16, or 32-bit transfers
- 2 MHz maximum clock rates for pattern I/O
- NI-DAQ driver compatible with LabVIEW, CVI, C, and Measurement Studio for Visual Basic and VB.NET
- 13.3 MB/s (pattern I/O) and 76 MB/s (handshaking) maximum throughput
- Start and stop triggering with pattern matching and change detection
 Data Sheet- New! Compare to similar products
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The National Instruments PCI-6533 (DIO-32HS) is a high-speed, 32-bit, parallel digital I/O interface for PCI. The NI PCI-6533 incorporates the NI DAQ-DIO ASIC, a 32-bit general-purpose digital I/O interface specifically designed to deliver high performance on plug-in digital I/O boards. This device performs single-point I/O, pattern I/O, and high-speed data transfer using a wide range of handshaking protocols at speeds up to 76 MB/s. You can operate the 32 lines as individually configurable single-line I/O, or as 8, 16, or 32-bit ports for pattern I/O and handshaking.
NI measurement services software is shipped with the NI 6533 for added value and ease of use. Bundled with the NI-DAQmx driver is Measurement & Automation Explorer, a utility that simplifies hardware configuration with device test panels, interactive measurements, and scaled I/O channels.
For a comparable low-cost digital device with higher throughput and performance, consider the 25 MHz PCIe-6536 (up to 100 MB/s), or the 50 MHz PCIe-6537 (up to 200 MB/s).
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PCI |
|---|
| OS Support | Windows, Real-Time |
|---|
| Measurement Type | Digital |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 0 |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 32 DIO |
|---|
| Timing | Hardware |
|---|
| Maximum Clock Rate | 2 MHz |
|---|
| Maximum Data Rate / Channel | 2 Mbits/s |
|---|
| Logic Levels | TTL, 5 V |
|---|
| Differential Logic | No |
|---|
| Maximum On-Board Memory | 0 Mbit |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/800 mA |
|---|
| Supports Pattern I/O? | Yes |
|---|
| Supports Handshaking I/O? | Yes |
|---|
| Supports Hardware Data Compare? | No |
|---|
| Supports Per Cycle Configuration of Line Direction? | No |
|---|
| Supports Linking/Looping Segments? | No |
|---|
| Supports Data Delay? | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Offers Watchdog Timer? | No |
|---|
| Offers Dedicated Bandwidth? | No |
|---|
| Digital Interface | Parallel |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| T-clock Capability | No |
|---|
| Triggering | Digital |
|---|
| External Clocking | Yes |
|---|
| Physical Specifications | |
|---|
| Length | 17.5 cm |
|---|
| Width | 10.7 cm |
|---|
| Height | 2 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
