The National Instruments PCI-6534 is a high-speed, 32-bit, parallel digital I/O interface for PCI. The NI PCI-6534 performs pattern I/O and high-speed data transfer using a wide range of handshaking protocols at speeds up to 80 MB/s through onboard memory. It features user-defined power-up states, start and stop triggering, pattern matching, and change detection. You can operate the 32 lines as individually configurable single-line I/O or as 8-, 16-, or 32-bit ports for pattern I/O and handshaking. The board comes bundled with the NI-DAQmx driver software and Measurement & Automation Explorer (MAX) configuration software, so you can interactively configure your device and view test panels for interactive measurements.
For a comparable low-cost digital device with higher throughput and performance, consider the 25 MHz NI PCIe-6536 (up to 100 MB/s) or the 50 MHz NI PCIe-6537 (up to 200 MB/s).
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet
