- 100 MHz maximum clock rate
- -2.0 to 5.5 V programmable voltage levels in 10 mV steps
- NI Synchronization and Memory Core (SMC) device for subnanosecond multidevice synchronization
- Real-time hardware comparison of acquired response data
- 1, 8, or 64 Mb/channel onboard memory
- 20 channels with per-cycle, per-channel bidirectional control
 Data Sheet- New! Compare to similar products
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The NI PCI-6552 is a 100 MHz digital waveform generator/analyzer. It features 20 channels with programmable voltage levels and per-clock cycle, per-channel direction control. The board contains deep onboard memory with triggering and pattern sequencing. The latest version of the NI-HSDIO driver software also adds the ability to perform immediate comparisons of expected data with acquired response data. With these board features, you can meet a wide range of digital stimulus-response application challenges, such as functional testing of memory chips and bidirectional communication.
The NI Digital Waveform Editor is an interactive software tool you can use with NI 6552 devices to quickly and easily create, edit, and import digital waveforms. The Digital Waveform Editor is included with the 8 and 64 Mb/channel models.
For more information on the new ATE features of the high-speed waveform generator/analyzer, read the white paper under the Resources tab.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PCI |
|---|
| OS Support | Windows, Real-Time |
|---|
| Measurement Type | Digital |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 0 |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 20 DIO |
|---|
| Timing | Hardware |
|---|
| Maximum Clock Rate | 100 MHz |
|---|
| Maximum Data Rate / Channel | 100 Mbits/s |
|---|
| Logic Levels | TTL, LVTTL, 1.8 V, 2.5 V, 3.3 V, 5 V, Programmable |
|---|
| Differential Logic | No |
|---|
| Maximum On-Board Memory | 64 Mbit |
|---|
| Maximum Input Range | -2..5.5 V |
|---|
| Maximum Output Range | -2..5.5 V |
|---|
| Input Current Flow | Sinking |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sourcing |
|---|
| Current Drive (Channel/Total) | 50 mA/600 mA |
|---|
| Supports Pattern I/O? | Yes |
|---|
| Supports Handshaking I/O? | Yes |
|---|
| Supports Hardware Data Compare? | Yes |
|---|
| Supports Per Cycle Configuration of Line Direction? | Yes |
|---|
| Supports Linking/Looping Segments? | Yes |
|---|
| Supports Data Delay? | Yes |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Offers Watchdog Timer? | No |
|---|
| Offers Dedicated Bandwidth? | No |
|---|
| Digital Interface | Parallel |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| T-clock Capability | Yes |
|---|
| Triggering | Digital |
|---|
| External Clocking | Yes |
|---|
| Physical Specifications | |
|---|
| Length | 35.5 cm |
|---|
| Width | 11.3 cm |
|---|
| Height | 2 cm |
|---|
| I/O Connector | 68-pin VHDCI female, SMB male |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
