NI cFP-PDB-100Fused Power Distribution Block |
The National Instruments cFP-PDB-100 power distribution block provides a way to distribute power from a single 10 to 30 VDC power supply, such as the NI PS-5, to FieldPoint and Compact FieldPoint I/O modules with fusing. The NI cFP-PDB-100 is ideal for applications that do not require module-to-module isolation. The block is shipped with 2 A, 32 V blade fuses on each of the output terminals. You can replace them with fuses up to 5 A if necessary. If you have two PS-5 power supplies, you can connect both power supplies to the cFP-PDB-100 to provide redundancy or to supply up to 10 A to the FieldPoint bank. Factory InstallationReduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems. Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Technical Support |
