NI PXI-8463 Series 21 Port, Single-Wire PXI-CAN Interface |
Data Sheet |
Configure System 
The National Instruments PXI-8463 Series 2 is a 1-port single-wire CAN interface designed for communicating with single-wire CAN devices. NI PXI-CAN modules use the Philips SJA1000 CAN Controller for advanced functionality such as listen-only, self-reception (echo), and advanced filtering modes and new transceivers for sleep/wake-up mode. Each CAN interface is shipped with NI-CAN device driver software. You can synchronize CAN, DAQ, vision, and motion modules using the PXI trigger bus. All National Instruments CAN interfaces are designed to meet the physical and electrical requirements for in-vehicle (automotive) networks based on CAN.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
System Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI PXI-8463 Series 2.
No text-based software is available for this Application Need and hardware combination.
Driver Software |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
