- 7 multiplexer/matrix configurations
- 60 VDC or 30 Vrms maximum voltage
- 900 channels/s switching speed
- For parallel operations requiring lower channel count consider the NI PXI-2576
- Matrix – 4x64 (1-wire), 8x32 (1-wire), and 4x32 (2-wire)
- Multiplexer – 256x1 (1-wire),
128x1 (2-wire), 64x1 (4-wire), or 16 banks of 8x1 (1-wire) - 400 mA maximum current
 Data Sheet |
Configure System 
The National Instruments SCXI-1130 is a high-density, multiconfiguration multiplexer/matrix switch module. With four multiplexer and three matrix configurations, the NI SCXI-1130 is an excellent solution for large or complex-channel-count systems. Multiplexer configurations include 256x1 (1-wire), 128x1 (2-wire), 64x1 (4-wire), or 16 banks of 16x1 (1-wire). Matrix configurations include 4x64 (1-wire), 8x32 (1-wire), or 4x32 (2-wire). These configurations are made available through the selection of an appropriate terminal block. With the speed of reed relays, the SCXI-1130 is an ideal front-end for high-speed measurement devices, such as the NI PXI-4070 6½-digit FlexDMM. For parallel operations requiring lower channel count consider the NI PXI-2576.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | SCXI |
|---|
| OS Support | Windows, Real-Time, Linux |
|---|
| LabVIEW RT Support | Yes |
|---|
| Switch Type | Matrix, Multiplexer |
|---|
| Relay Type | Reed |
|---|
| Connectivity | Terminal Block |
|---|
| Product Certifications | C-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety |
|---|
| Input Characteristics | |
|---|
| Multiplexer Configurations | 256x1, 1-wire
128x1, 2-wire
64x1, 4-wire |
|---|
| Matrix Configurations | 4x64, 1-wire
8x32, 1-wire
4x32, 2-wire |
|---|
| Maximum Switching Voltage DC (Pollution Degree 2) | 60 VDC |
|---|
| Maximum Switching Voltage AC | 30 Vrms |
|---|
| Maximum Switching Current | 0.4 A |
|---|
| Maximum Carry Current | 0.4 A |
|---|
| Maximum Switching Power | 10 W |
|---|
| Bandwidth | 15 MHz |
|---|
| Relay Count Tracking | Yes |
|---|
| Voltage Category | CAT I |
|---|
| Path Resistance (Typical) | 2 Ohm |
|---|
| Thermal EMF | 50 µV |
|---|
| Dynamic Characteristics | |
|---|
| Mechanical Relay Life | 1 x 1010 cycles |
|---|
| Scan Rate | 900 cycles/s |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Digital |
|---|
| External Clocking | No |
|---|
| Physical Specifications | |
|---|
| Length | 19.8 cm |
|---|
| Width | 17.3 cm |
|---|
| Height | 3 cm |
|---|
| I/O Connector | 176-pin docking station plug |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
