- Works with internal or external power sources
- Control up to 64 external relays
- High-power protection circuitry
- IVI-compliant NI-SWITCH driver software
- Provides up to 50 VDC or 600 mA per channel with an external supply
- Includes connector and backshell for signal connections
Data Sheet |
Configure System
The National Instruments PXI-2567 is a 64-channel external relay driver, capable of providing up to 50 V or 600 mA of drive capacity (with an external supply). The relay driver is the ideal choice when the current and voltage requirements for relays exceed those found in existing relay modules (or for relays embedded in a test system). The NI PXI-2567 includes overcurrent, overvoltage, and flyback protection to ensure long-life operation. The PXI-2567 can also drive small DC motors or other inductive relay coils.
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
| Form Factor | PXI |
| OS Support | Windows, Real-Time, Linux |
| LabVIEW RT Support | Yes |
| Switch Type | External Relay Driver |
| Product Certifications | C-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety |
| Input Characteristics | |
| Number Of Channels | 32 2-coil, 64 single-coil |
| Relay Count Tracking | Yes |
| Maximum Voltage Drive | 50 V |
| Maximum Current Drive | 0.6 A |
| Dynamic Characteristics | |
| Scan Rate | 150 cycles/s |
| Timing/Triggering/Synchronization | |
| Synchronization Bus (RTSI) | Yes |
| Triggering | Digital |
| External Clocking | No |
| Physical Specifications | |
| Length | 16 cm |
| Width | 10 cm |
| Height | 2 cm |
| I/O Connector | 78-pin D-Sub |
Factory Installation
Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
- Installation of all individual hardware and software components as well as full testing to eliminate conflicts
- Custom documentation plus a custom restore and startup utility
- 2-year warranty and calibration coverage
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|