Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2529

128-Crosspoint Matrix Switch

  • 1 A switching/2 A carry
  • 150 VDC or 150 Vrms capacity
  • 4x32 and 8x16 2-wire matrix configurations
  • Multiple-module synchronization with hardware triggers
  • For very high-density, high-voltage analog input or signal routing applications
  • Data Sheet  |   Configure System popup

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
  NI PXI-2529      
778739-01 4x32 2-wire
NI Recommended
-- For price, select country  
778739-01 8x16 2-wire -- For price, select country  

Each NI PXI-2529 (4x32 2-wire) requires: 1 Terminal Block

NI PXI-2529 (4x32 2-wire) Terminal Block
Step 2: Select Terminal Block
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
Screw Terminals
196762-01 NI TB-2636 Terminal Block for NI PXI-2529 4 x 32 (2-Wire) Matrix
NI Recommended
-- For price, select country  
778840-01 NI TB-2634, Terminal Block for NI PXI-2529 as 4x32 Matrix -- For price, select country  
Step 3: Select Optional Accessories
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
Other
778546-09 NI Switch Executive Development System -- For price, select country  
Step 4: Add to Cart or Get a Quote
Step 2: Select Terminal Block
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
Screw Terminals
778839-01 NI TB-2635, Terminal Block for NI PXI-2529 as 8x16 Matrix
NI Recommended
-- For price, select country  
Step 3: Select Optional Accessories
Part
Number
Description Est Ship Days Glossary Definition US Dollars
(change)
Qty
Other
778546-09 NI Switch Executive Development System -- For price, select country  
Step 4: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The National Instruments PXI-2529 is a high-density matrix built to serve high-channel-count switching applications. The module is a 2-wire matrix, configurable with front-mounting terminal blocks to achieve two different matrix configurations (4x32 and 8x16). The NI PXI-2529 is designed to work well with both low- and high-voltage levels. For low-voltage measurements, the PXI-2529 uses relays with low thermal offset to ensure accurate measurements. These same relays can handle up to 150 Vrms or 150 VDC.

Specifications Documents


Specifications Summary

General 
Form FactorPXI
OS SupportWindows, Real-Time, Linux
LabVIEW RT SupportYes
Switch TypeMatrix
Relay TypeElectromechanical
ConnectivityTerminal Block
Product CertificationsC-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety
Input Characteristics 
Matrix Configurations8x16, 2-wire
4x32, 2-wire
Maximum Switching Voltage DC (Pollution Degree 2)150 VDC
Maximum Switching Voltage AC150 Vrms
Maximum Switching Current1 A
Maximum Carry Current2 A
Maximum Switching Power30 W
Bandwidth10 MHz
Relay Count TrackingYes
Voltage CategoryCAT I
Path Resistance (Typical)1 Ohm
Thermal EMF9 µV
Dynamic Characteristics 
Mechanical Relay Life5 x 107 cycles
Scan Rate110 cycles/s
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)Yes
TriggeringDigital
External ClockingNo
Physical Specifications 
Length16 cm
Width10 cm
Height2 cm
I/O Connector100-pin HDI

Factory Installation

Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:

  • Installation of all individual hardware and software components as well as full testing to eliminate conflicts
  • Custom documentation plus a custom restore and startup utility
  • 2-year warranty and calibration coverage

This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

  • You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
  • Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
  • View your RMA support request status online
  • Register your product

Technical Support

www.ni.com/support