Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6722

Static and Waveform Analog Output -- 13-Bit, 8 Channels

Configure Page for: Print PDF Rich Text
  • 800 kS/s per channel for one channel; 182 kS/s per channel for 8 channels
  • Slew rate limited to 10 kHz full-scale sine wave
  • Simultaneous update; onboard or external update clock
  • RTSI bus for synchronization with DAQ, motion, and vision products
  • NI-DAQmx driver with configuration utility to simplify configuration and measurements
  • Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET
Compare to similar products on graph  |  table
View Data Sheet and Specifications

The NI PCI-6722 delivers low-cost analog outputs to meet a wide range of application requirements. It provides eight analog output channels with speeds of 182 kS/s per channel, 13-bit resolution, and digital triggering. This board also features eight digital I/O and two 24-bit counter/timers. It uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so you can create custom measurement solutions to test innovative designs. The PCI-6722 is ideal for applications such as stimulus-response, signal simulation, waveform generation, and actuator stimulation. It works with NI Analog Waveform Editor software to help you create complex waveforms. You can create new waveforms using the more than 20 built-in waveform primitives or formula/equation entry features of this software.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-6722 Complete Package

Each NI PCI-6722 requires:

1 Connector Block 1 Cable NI PCI-6722 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6722 and Accessories

Hardware Subtotal: $ 1,297
NI PCI-6722 - 778705-01 Qty $ 899 each
Connector Block - Screw Terminal
SCB-68 - 776844-01
 Qty $ 299 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Cable - Shielded
SH68-C68-S (2m) - 186381-02
 Qty $ 99 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0
NI LabVIEW Full Development System for Windows (English) - 776670-35 Qty $ 2,599 each
Note : You should only purchase this device without software if you already own compatible application software. View Compatible Application Software | Compare to LabVIEW SignalExpress Limited Edition [Close]
Note : This software is required to use LabVIEW Application Builder for Windows. You should purchase LabVIEW Application Builder for Windows without a LabVIEW Development System only if you already own LabVIEW Base or Full for Windows version 8.6.1 or later. Upgrade Your Development System Now [Close]
LabVIEW Application Builder for Windows (English) - 776675-35 Qty $ 999 each
Note : NI recommends this software for use with your hardware to maximize your productivity. [Close]
Change Software
Learn about other compatible software, OS, and language options.
Estimated Shipping Days:
Package Price: $ 1,297
  Add to Cart >>
Guarantee your price for 30 days (learn more)Instant Quote
 
Save for Later

You have selected United States as the country where you will use this product(s) (change)

Specifications Documents


Specifications Summary

General
Product Name PCI-6722
Product Family Multifunction Data Acquisition
Form Factor PCI
Operating System/Target Linux , Real-Time , Windows
RoHS Compliant No
Analog Input
Channels 0 , 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 8
Resolution 13 bits
Max Voltage 10.0 V
Maximum Voltage Range 10.0 , -10.0 V
Maximum Voltage Range Accuracy 10.780 mV
Minimum Voltage Range 10.0 , -10.0 V
Minimum Voltage Range Accuracy 10.780 mV
Update Rate 800 kS/s
Current Drive Single 5 mA
Current Drive All 40 mA
Digital I/O
Bidirectional Channels 8
Input-Only Cannels 0
Output-Only Channels 0
Number of Channels 8 , 0 , 0
Timing Software
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range 5.0 , 0.0 V
Maximum Output Range 5.0 , 0.0 V
Counter/Timers
Counters 2
Number of DMA Channels 1
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 5.0 , 0.0 V
Max Source Frequency 20 MHz
Minimum Input Pulse Width 50 ns
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 100.0 ppm
Logic Levels TTL
Physical Specifications
Length 17.400 cm
Width 9.800 cm
I/O Connector 68-pin VHDCI female

View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »