- 800 kS/s per channel for one channel; 45 kS/s per channel for 32 channels
- Slew-rate limited to 10 kHz full-scale sine wave
- Simultaneous update, onboard or external update clock
- NI-DAQmx driver with configuration utility to simplify configuration and measurements
- Superior integration -- LabVIEW, CVI, and Measurement Studio for Visual Basic and Visual Studio .NET
- RTSI bus for synchronization with DAQ, motion, and vision products
Data Sheet
- New! Compare to similar products
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
This board requires TWO cables and TWO accessories.
The National Instruments PCI-6723 delivers low-cost, high-density analog outputs to meet a wide range of application requirements. It provides 32 analog output channels with speeds of 45 kS/s per channel, 13-bit resolution, and digital triggering. In addition to analog output, this board features eight ditital I/O and two 24-bit counter/timers. The board uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so users can create custom measurement solutions to test innovative designs. The NI PCI-6723 is ideal for applications such as stimulus-response, signal simulation, waveform generation, and actuator stimulation. This board works with the Analog Waveform Editor software to facilitate the creation of complex waveforms. Using this software, you can create new waveforms using more than 20 built-in waveform primitives or formula/equation entry.
Customers interested in this product were also interested in:
Arbitrary Waveform Generator - Up to 400 MS/s, Up to 512 MB onboard memory, 1 output
Function Generator - Up to 100 MS/s, sine and square wave generation, 1 output
Dynamic Signal Acquisition and Generation - Up to 24-bit resolution, 2 outputs
Compact FieldPoint - Distributed software-timed analog output, 8 outputs
CompactRIO - Distributed, 100 kS/s, 4 outputs
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
| Form Factor | PCI |
| OS Support | Windows, Linux |
| Analog Input | |
| Number of Channels | 0 |
| Analog Output | |
| Number of Channels | 32 |
| Update Rate | 800 kS/s |
| Resolution | 13 bits |
| Maximum Voltage Range | -10..10 V |
| Range Accuracy | 10.78 mV |
| Minimum Voltage Range | -10..10 V |
| Range Accuracy | 10.78 mV |
| Current Drive (Channel/Total) | 5 mA/160 mA |
| Digital I/O | |
| Number of Channels | 8 DIO |
| Timing | Software |
| Logic Levels | TTL |
| Maximum Input Range | 0..5 V |
| Maximum Output Range | 0..5 V |
| Input Current Flow | Sinking, Sourcing |
| Programmable Input Filters | No |
| Output Current Flow | Sinking, Sourcing |
| Current Drive (Channel/Total) | 24 mA/192 mA |
| Watchdog Timer | No |
| Supports Programmable Power-Up States? | No |
| Supports Handshaking I/O? | No |
| Supports Pattern I/O? | No |
| Counter/Timers | |
| Number of Counter/Timers | 2 |
| Resolution | 24 bits |
| Maximum Source Frequency | 20 MHz |
| Minimum Input Pulse Width | 50 ns |
| Logic Levels | TTL |
| Maximum Range | 0..5 V |
| Timebase Stability | 100 ppm |
| GPS Synchronization | No |
| Pulse Generation | Yes |
| Buffered Operations | Yes |
| Debouncing/Glitch Removal | No |
| Number of DMA Channels | 1 |
| Timing/Triggering/Synchronization | |
| Triggering | Digital |
| Physical Specifications | |
| Length | 17.4 cm |
| Width | 9.8 cm |
| I/O Connector | 68-pin VHDCI female |
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
Select your application need to see compatible software options for the NI PCI-6723.
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
|