NI cFP-QUAD-5104-Axis, Quadrature Encoder Input Module for Compact FieldPoint |
Data Sheet |
Configure System 
The National Instruments cFP-QUAD-510 accepts up to four channels of single-ended or differential quadrature encoder inputs. You can use the NI cFP-QUAD-510 to measure position and velocity in both forward and reverse directions, and it features a 250 kHz lowpass filter on all input channels to eliminate false counts due to high frequency transients. The cFP-QUAD-510 connects to either single-ended TTL or differential line signals. In addition, the cFP-QUAD-510 has an internal timebase to automatically determining the velocity for each of the four axis. If you supply external 8 to 30 VDC power, the module will generate regulated 5 VDC for encoders. To make installation and setup easier the cFP-QUAD-510 is hot swappable and will be automatically detected and identified by the configuration software. For accurate position measurement, we recommend that you use this module with LabVIEW Real-Time controllers (NI cFP-20xx).
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related Information
System Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI cFP-QUAD-510.
Driver Software |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
