- 300 kS/s maximum update rate per channel
- 4 to 20 mA current sinks per channel
- 10 channels, ±10 V, 0 to 10 V range
- Legacy analog output device for ISA
- 8 digital I/O lines (5 V/TTL)
- Traditional NI-DAQ (Legacy) driver software
 Data Sheet
The legacy National Instruments AT-AO-10 is a 12-bit analog output board for ISA computers. Please consider instead our newer and higher performance NI 672x devices (for PCI and PXI) The NI AT-AO-10 has 10 identical output channels, each of which has voltage output and can sink 4 to 20 mA current when connected to an external source. The voltage output of each channel is either bipolar or unipolar and is derived from the onboard reference or an external reference. A built-in 8-bit digital I/O port provides additional control capability.
Additional Product Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | ISA |
|---|
| OS Support | Windows |
|---|
| Analog Input | |
|---|
| Number of Channels | 0 |
|---|
| Analog Output | |
|---|
| Number of Channels | 10 |
|---|
| Update Rate | 300 kS/s |
|---|
| Resolution | 12 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Minimum Voltage Range | 0..10 V |
|---|
| Maximum Current Range | 4..20 mA |
|---|
| Minimum Current Range | 4..20 mA |
|---|
| Current Drive (Channel/Total) | 5 mA/50 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 0 |
|---|
| Physical Specifications | |
|---|
| Length | 33.8 cm |
|---|
| Width | 11.4 cm |
|---|
| I/O Connector | 50-pin male |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
