Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI DAQCard-6062E (for PCMCIA)

500 kS/s, 12-Bit, 16 Analog Input Multifunction DAQ

Configure Page for: Print PDF Rich Text
  • Consider the NI USB-6351 for 1.25 MS/s, 16-bit analog input; built-in connectivity; and more
  • 2 analog outputs; 8 digital I/O lines; two 24-bit counters; analog triggering
  • Use with the LabVIEW PDA Module for handheld data acquisition applications
  • NIST-traceable calibration and more than 70 signal conditioning options
  • Superior LabVIEW, LabWindows™/CVI, and Measurement Studio integration for VB and VS .NET
  • Included NI-DAQmx driver software and additional measurement services
Data Sheet  |  Specifications   popup


For laptop-based measurements, National Instruments recommends the NI USB-6351 and NI-DAQmx driver software.

The National Instruments DAQCard-6062E delivers E Series performance to laptops and handheld devices that have a PCMCIA (PC Card) slot. You get up to 500 kS/s, 12-bit resolution on 16 single-ended (eight differential) analog inputs. Depending on your system, the NI DAQCard-6062E can stream to disk at rates up to 500 kS/s.

Note to Windows Vista Users
DAQCard (PCMCIA) support for Windows Vista is not available for NI data acquisition devices. For laptop-based measurements with 16-bit resolution, please consider the NI X Series for USB.

The mark LabWindows is used under a license from Microsoft Corporation.

Data Sheet | View Pricing and Purchasing Information »

NI DAQCard-6062E Complete Package

Each NI DAQCard-6062E requires:
1 Connector Block 1 Cable NI DAQCard-6062E Software

Roll over icons above to learn why you need each item in the package.

NI DAQCard-6062E and Accessories

Hardware Subtotal: $ 2,218
NI DAQCard-6062E - 777976-01 Qty $ 1,760 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 319 each
Cable - Shielded
SHC68-68-EPM Cable (2m) - 192061-02
Select length:
Qty $ 139 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 5 - 10
Package Price: $ 2,218
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »