Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6034E

200 kS/s, 16-Bit, 16-Analog-Input Multifunction DAQ

Configure Page for: Print PDF Rich Text
  • 8 digital I/O lines; two 24-bit counters
  • Included NI-DAQmx driver software and additional measurement services
  • Consider NI M Series for 16-bit resolution, 1.25 MS/s, and similar costs with the PCI-6250.
  • NIST-traceable calibration certificate and more than 70 signal conditioning options
  • LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Basic and Visual Studio .NET integration
  • FREE award-winning global services and support at ni.com/support
Data Sheet  |  Specifications   popup


National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase accuracy and perform 16-bit measurements at 1.25 MS/s with the PCI-6250.

Add sensor and high-voltage measurement capability to your E Series device with National Instruments SCC or SCXI signal conditioning. The National Instruments PCI-6034E is the lowest-cost NI 16-bit data acquisition board using E Series technology to deliver reliable measurements in a wide range of applications. You get up to 200 kS/s sampling and 16-bit resolution on 16 single-ended or eight differential analog inputs. Depending on your hard drive, the NI PCI-6034E can stream to disk at rates up to 200 kS/s.

Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices. Complete your DAQ system with NI signal conditioning to measure virtually any type of sensor and voltage.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-6034E Complete Package

Each NI PCI-6034E requires:
1 Connector Block 1 Cable NI PCI-6034E Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6034E and Accessories

Hardware Subtotal: $ 1,597
NI PCI-6034E - 778075-01 Qty $ 1,144 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 319 each
Cable - Shielded
SH68-68-EP Cable (2m) - 184749-02
Select length:
Qty $ 134 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show

Software

Software Subtotal: $ 0
Note : You should only purchase this device without software if you already own compatible application software. [View Full List]
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Change Software
Learn about all compatible software and get recommendations based on your needs.
Estimated Shipping Days: 5 - 10
Package Price: $ 1,597
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »