- 16 analog inputs (16-bit, 200 kS/s)
- 2 analog outputs (16-bit, 1 kS/s); 8 DIO; 24-bit counters
- Consider NI M Series multifunction DAQ for USB for higher performance and built-in connectivity
- Use with the NI LabVIEW PDA Module for handheld data acquisition applications
- Compatible with NI LabVIEW, LabWindows™/CVI, and Measurement Studio for Visual Studio .NET
- NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software
 Data Sheet- New! Compare to similar products
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Automate your portable measurements with the National Instruments DAQCard-6036E, the fastest NI 16-bit PCMCIA card and the first from NI to offer both 16-bit analog inputs (16 single-ended or eight differential) and two 16-bit analog outputs. Through innovative NI ASIC design, the NI DAQCard-6036E provides all of the advanced functions and technologies of full-size NI E Series data acquisition (DAQ) devices in a PCMCIA card at a low price. It also features an onboard temperature sensor and temperature-drift-protection circuitry to ensure measurement accuracy in laptop computers, which can operate at warmer temperatures than desktop PCs.
Note: DAQCard (PCMCIA) support for the Windows Vista OS is not available for NI data acquisition devices. For laptop-based measurements with 16-bit resolution, consider NI M Series DAQ for USB, available with direct connectivity in both bus-powered and externally powered form factors.
The mark LabWindows is used under a license from Microsoft Corporation.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PCMCIA |
|---|
| OS Support | Windows |
|---|
| DAQ Product Family | E Series |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 200 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 7.56 mV |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Range Accuracy | 0.0611 mV |
|---|
| Number of Ranges | 4 |
|---|
| On-Board Memory | 1024 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 1 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 2.547 mV |
|---|
| Minimum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 2.547 mV |
|---|
| Current Drive (Channel/Total) | 5 mA/10 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Triggering | Digital |
|---|
| Physical Specifications | |
|---|
| Length | 8.56 cm |
|---|
| Width | 5.4 cm |
|---|
| Height | 0.5 cm |
|---|
| I/O Connector | 68-pin VHDCI female |
|---|
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
- Installation and integration test of all individual hardware
- Courtesy installation of system driver sets and application development environments
- Three-year warranty and calibration coverage
- Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
