NI PCI-6036E

200 kS/s, 16-Bit, 16-Analog-Input Multifunction DAQ

[+] Enlarge Picture

FREE award-winning global services and support at ni.com/support
Consider NI M Series for 16-bit resolution, 1.25 MS/s, and similar costs with the PCI-6251.
LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Basic and Visual Studio .NET integration
Two 16-bit analog outputs; eight digital I/O lines; two 24-bit counters
NIST-traceable calibration certificate and more than 70 signal conditioning options
Included NI-DAQmx driver software and additional measurement services

Data Sheet

Overview
Specifications
Pricing
Software
Services
Resources

National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase accuracy and perform 16-bit measurements at 1.25 MS/s with the PCI-6251.

Add sensor and high-voltage measurement capability to your E Series device with National Instruments SCC or SCXI signal conditioning. The National Instruments PCI-6036E is a low-cost DAQ board that uses E Series technology to deliver reliable, 16-bit acquisition for a wide range of applications. The NI PCI-6036E has sixteen 16-bit analog inputs and two 16-bit analog outputs. In addition, it has eight digital I/O lines and two 24-bit, 20 MHz counter/timers. Depending on your hard drive, the PCI-6036E can stream to disk at rates up to 200 kS/s.

Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices. Complete your DAQ system with NI signal conditioning to measure virtually any type of sensor and voltage.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-6036E Complete Package

Each NI PCI-6036E requires:


1 Connector Block		1 Cable		NI PCI-6036E		Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6036E and Accessories

Hardware Subtotal: $ 1,677

NI PCI-6036E - 778465-01	Qty	$ 1,259 each
Connector Block - Screw Terminal SCC-68 - 779475-01	Qty	$ 299 each
Warning: You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning: You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Cable - Shielded SH68-68-EP Cable (2m) - 184749-02	Qty	$ 119 each
Warning: You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning: You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Change Accessories Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 2,599

	NI LabVIEW Full Development System for Windows (English) - 776670-09	Qty	$ 2,599 each
	Note: NI recommends this software for maximum ease of use and productivity with this device. You should only purchase this device without software if you already own compatible application software. View Compatible Application Software \| Compare to LabVIEW SignalExpress Limited Edition
	Note: This software is required to use null. You should only purchase null without a LabVIEW Development System if you already own a minimum of LabVIEW Base for Windows version 8.6.1. Upgrade Your Development System Now
The NI PCI-6036E is also compatible with other software. View All Compatible Software and OS/Language Options»

Estimated Shipping Days:

Package Price: $ 4,276

You have selected United States as the country where you will use this product(s) (change)

Additional Product Information

Related Information

View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Form Factor	PCI
Operating System / Target	Windows, Real-Time, Linux, Mac OS
DAQ Product Family	E Series
LabVIEW RT Support	Yes
Analog Input
Number of Channels	16 SE/8 DI
Sample Rate	200 kS/s
Resolution	16 bits
Simultaneous Sampling	No
Maximum Voltage Range	-10..10 V
Range Accuracy	7.56 mV
Minimum Voltage Range	-50..50 mV
Range Accuracy	0.0611 mV
Number of Ranges	4
On-Board Memory	512 samples
Analog Output
Number of Channels	2
Update Rate	10 kS/s
Resolution	16 bits
Maximum Voltage Range	-10..10 V
Range Accuracy	2.417 mV
Minimum Voltage Range	-10..10 V
Range Accuracy	2.417 mV
Current Drive (Channel/Total)	5 mA
Digital I/O
Number of Channels	8 DIO
Timing	Software
Logic Levels	TTL
Maximum Input Range	0..5 V
Maximum Output Range	0..5 V
Input Current Flow	Sinking, Sourcing
Programmable Input Filters	No
Output Current Flow	Sinking, Sourcing
Current Drive (Channel/Total)	24 mA/192 mA
Watchdog Timer	No
Supports Programmable Power-Up States?	No
Supports Handshaking I/O?	No
Supports Pattern I/O?	No
Counter/Timers
Number of Counter/Timers	2
Resolution	24 bits
Maximum Source Frequency	20 MHz
Minimum Input Pulse Width	10 ns
Logic Levels	TTL
Maximum Range	0..5 V
Timebase Stability	100 ppm
GPS Synchronization	No
Pulse Generation	Yes
Buffered Operations	Yes
Debouncing/Glitch Removal	No
Number of DMA Channels	1
Timing/Triggering/Synchronization
Synchronization Bus (RTSI)	Yes
Triggering	Digital

View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Learn More About Calibration Services

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Select your application need to see compatible software options for the NI PCI-6036E.

Application Need
Data acquisition, analysis, and user interface customization	Data logging
Automated test and test sequencing	Simulation and control design
Industrial monitoring and control

Graphical Programming

Text-Based Programming

Select any of the following software products
Part Number	Description	Est Ship Days	US Dollars (change)	Qty
LabVIEW Software
776670-09	NI LabVIEW Full Development System for Windows (English) NI Recommended	1 - 2	$ 2,599.00
777756-09	NI LabVIEW Full Development System for Linux	5 - 10	$ 2,599.00
776675-01	LabVIEW Application Builder for Windows (English) NI Recommended	5 - 10	$ 999.00
777755-03	NI LabVIEW Application Builder for Linux	5 - 10	$ 999.00
778406-03	NI LabVIEW Report Generation Toolkit for Microsoft Office	5 - 10	$ 529.00
Specialty Software
778807-09	DIAdem Advanced Edition (English)	5 - 10	$ 2,399.00