The National Instruments cFP-DO-410 module features eight sourcing digital output channels. Each channel is electronically fused to protect against short circuits and wiring errors. Over-current errors light an LED on the module and create an alarm that can be monitored in software. Each channel is compatible with voltages from 5 to 30 VDC and can source up to 1 A per channel. Each channel has an LED to indicate the channel on/off state. The module features 2300 V transient isolation between the output channels and the backplane. To make installation and setup easier the NI cFP-DO-410 features HotPnP (plug and play) operation and is automatically detected and identified by the configuration software.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.