NI cFP-DO-40316-Channel Sinking Digital Output Module for Compact FieldPoint |
Data Sheet |
Configure System 
The National Instruments cFP-DO-403 module features 16 sinking digital output channels. Each channel is compatible with voltages from 5 to 30 VDC and can source up to 2 A per channel with a maximum of 16 A squared per module. (The sum of the squares of the output currents from all 16 channels must be no greater than 16.) Each channel has an LED to indicate the channel on/off state. The module features 2300 V transient isolation between the output channels and the backplane. To make installation and setup easier the cFP-DO-403 features HotPnP (plug and play) operation and is automatically detected and identified by the configuration software.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related Information
System Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI cFP-DO-403.
Driver Software |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
