The NI PCI-6111 S Series data acquisition (DAQ) board features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy. With 5 MS/s per-channel sampling rates, eight input ranges from ±0.2 to ±42 V, two 16-bit analog outputs, two 24-bit counter/timers, and eight general-purpose digital I/O lines, the PCI-6111 can be used in a variety of applications.
The PCI-6111 is a full-length PCI board. Please verify with your PC vendor that there is sufficient room in the computer chassis to house this board. See the KnowledgeBase article in the Resources tab for more information.
Using NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and the power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional development systems include LabVIEW SignalExpress for interactive data logging. S Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW 7.1 Real-Time Module. S Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.0.
Driver Software S Series devices work with multiple OSs using one of three driver software options: NI-DAQmx, NI-DAQmx Base, and the NI Measurement Hardware DDK (Driver Development Kit).
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.