NI PCI-6115 12-Bit, 10 MS/s/ch, Simultaneous Sampling Multifunction DAQ

  • Print
  • PDF
  • Rich Text
  • 4 high-speed analog inputs, 10 MS/s per channel
  • Deep onboard memory (32 or 64 MS) and extended input ranges to ±42 V
  • Software-selectable onboard antialiasing filters
  • Two 12-bit analog outputs; 4 MS/s single channel, 2.5 MS/s dual channel
  • 8 digital I/O lines; two 24-bit counters; analog and digital triggering
  • NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
  • Data Sheet
  • View Support Resources
The NI PCI-6115 S Series data acquisition (DAQ) board features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy. The deep onboard memory delivers reliable data streaming with fewer dependencies on bus availability. Half of the onboard memory is dedicated to analog input and the other half to analog output. With 10 MS/s per channel sampling rates, eight input ranges from ±0.2 to ±42 V, onboard antialiasing filters, two 12-bit analog outputs, two 24-bit counter/timers, and eight general-purpose digital I/O lines, the PCI-6115 can be used in a variety of applications.

The PCI-6115 is a full-length PCI board. Please verify with your PC vendor that there is sufficient room in the computer chassis to house this board. See the KnowledgeBase article in the Resources tab for more information.

Application Software
Using NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional development systems include LabVIEW SignalExpress for interactive data logging. S Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW 7.1 Real-Time Module. S Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.0.

Driver Software
S Series devices work with multiple OSs using one of three driver software options: NI-DAQmx, NI-DAQmx Base, and the NI Measurement Hardware DDK (Driver Development Kit).

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Specifications Documents

Specifications Summary

General
Product Name PCI-6115
Product Family Multifunction Data Acquisition
Form Factor PCI
Part Number 778554-01 , 778534-01
Operating System/Target Real-Time , Linux , Mac OS , Windows
LabVIEW RT Support Yes
DAQ Product Family S Series
Measurement Type Quadrature encoder , Digital , Voltage , Frequency
RoHS Compliant No
Signal Conditioning Anti-aliasing filter , Low-pass filtering
Analog Input
Channels 4 , 0
Single-Ended Channels 0
Differential Channels 4
Resolution 12 bits
Sample Rate 10 MS/s
Max Voltage 42 V
Maximum Voltage Range -42 V - 42 V
Maximum Voltage Range Accuracy 210 mV
Maximum Voltage Range Sensitivity 20.5 mV
Minimum Voltage Range -0.2 V - 0.2 V
Minimum Voltage Range Accuracy 400 µV
Minimum Voltage Range Sensitivity 0.098 mV
Number of Ranges 8
Simultaneous Sampling Yes
On-Board Memory 64 MB
Analog Output
Channels 2
Resolution 12 bits
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 14 mV
Maximum Voltage Range Sensitivity 4.9 mV
Minimum Voltage Range -10 V - 10 V
Minimum Voltage Range Accuracy 14 mV
Minimum Voltage Range Sensitivity 4.9 mV
Update Rate 4 MS/s
Current Drive Single 5 mA
Digital I/O
Bidirectional Channels 8
Input-Only Channels 0
Output-Only Channels 0
Timing Hardware
Maximum Clock Rate 10 MHz
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Maximum Input Range 0 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 2
Number of DMA Channels 1
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 20 MHz
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 100 ppm
Logic Levels TTL
Physical Specifications
Length 31.2 cm
Width 10.6 cm
I/O Connector 68-pin male SCSI-II type
Timing/Triggering/Synchronization
Triggering Analog , Digital
Synchronization Bus (RTSI) Yes

NI PCI-6115 Complete Package

Each NI PCI-6115 requires:

Roll over icons above to learn why you need each item in the package.

1 Connector Block

1 Cable

NI PCI-6115

Software

NI PCI-6115 and Accessories

NI PCI-6115
778554-01 Qty $ 5,232 each
778534-01 Qty $ 4,075 each
Required Accessories
Connector Block - BNC Terminal
BNC-2110 - 777643-01
Qty $ 373 each
Cable - Shielded
SH68-68-EP Cable (2m) - 184749-02
Select length:
Qty $ 135 each
Change Accessories

Learn about all compatible accessories and get recommendations based on your application needs.

Optional Accessories
Hardware Subtotal: $ 5,740

Software

Note : You should only purchase this device without software if you already own compatible application software. [View Full List]
NI Developer Suite Core for Windows (English) , 1 year SSP Qty $ 5,299 each
Change Software

Learn about all compatible software and get recommendations based on your needs.

Software Subtotal: $ 0

Package Price: $ 5,740

Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote