Consider the NI PXIe-6124 for applications up to 4 MS/s. See the Resources tab for more information.
The NI PXI-6115 features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy. The deep onboard memory delivers reliable data streaming with fewer dependencies on bus availability. Half of the onboard memory is dedicated to analog input and the other half to analog output. With 10 MS/s per channel sampling rates, eight input ranges from ±0.2 to ±42 V, onboard antialiasing filters, two 12-bit analog outputs, two 24-bit counter/timers, and eight general-purpose digital I/O lines, the PXI-6115 can be used in a variety of applications.
Some examples include: - 42 V automotive applications - Transient and ballistics measurements - Radar, sonar, ultrasound - High-energy physics - IF digitization
Direct Connectivity The NI TB-2708 provides direct SMB connectivity to the PXI-6115. The nine SMB connectors offer direct access to four analog inputs, two analog outputs, analog or digital trigger lines, onboard counters, or programmable synchronization lines. In addition to the SMB connectors, you can use the MFIT-Pigtail cable to an auxiliary connector for access to other onboard counters and digital I/O lines.
Application Software Using NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional development systems include LabVIEW SignalExpress for interactive data logging. NI S Series data acquisition (DAQ) devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. S Series DAQ devices are also compatible with Visual Studio .NET, ANSI C/C++, and Visual Basic 6.0.
For additional information and related products, see the Resources tab.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
