NI cFP-CB-3Integrated Isothermal Connector Block for Wiring Thermocouples to the cFP-TC-120 Module |
You can easily wire signals to the inputs of the cFP-TC-120 thermocouple module with the cFP-CB-3. This isothermal connector block mounts onto the backplane and provides a convenient way to connect the thermocouple signals. Each cFP-CB-3 comes with a thermistor for cold-junction compensation and two strain-relief bars -- one for individual wires and one for thicker cables. The cFP-CB-3 also has slots for wire ties to further secure cables and features color-coded terminals to make wiring easier. Additional Product Information
Factory InstallationReduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems. Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Technical Support |

