NI cFP-PG-5228-Channel 5-30 Volt Sinking Pulse Generation Module for Compact FieldPoint |
The NI cFP-PG-522 is a pulse generation output module that provides eight outputs, each of which can generate finite or continuous pulse trains. The frequency and duty cycle are programmable. The duty cycle is programmed by entering the high and low times for the channel. There are three internal timebases available 100 µs, 10 ms, and 1 s. The module also features an LED per channel that indicates if the channel is generating pulses. From software you can start and stop finite pulse trains, read the number of pulses remaining, and read the output state of the channel. To make installation and setup easier the cFP-PG-522 features HotPnP (plug and play) operation and will be automatically detected and identified by the configuration software.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related InformationSpecifications SummarySystem Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the NI cFP-PG-522.
Driver Software |
|||||||||||||||||||
