The National Instruments PXI-4070 FlexDMM achieves remarkable throughput rates while maintaining precision and stable measurement accuracy. This combination of speed and accuracy was previously available only with higher-resolution digital multimeters (DMMs) costing thousands of more dollars. Thanks to the National Instruments proprietary FlexDMM technology, this PXI DMM also provides a fully isolated, high-voltage digitizer capable of acquiring waveforms at sampling rates up to 1.8 MS/s at ±300 V input. Using the analysis functions in National Instruments LabVIEW software, you can analyze these waveforms in both the time and frequency domains. Because of its superior speed, accuracy, and functionality, the NI PXI-4070 is ideal for use in automated tests on both the production floor and in R&D environments.
Integration with PXI Switches You also can use the PXI-4070 with PXI switches to form a multichannel, high-voltage data acquisition system. The NI PXI-2527 64-channel, 300 V multiplexer offers a low-thermal emf solution for both high and low-voltage measurements. The NI PXI-2530 128-channel reed relay multiplexer offers more density for higher-channel-count systems and better performance for low-current switching. For additional switch configurations, visit the PXI Switches link in the Resources section.
Improve Resistance and Current Measurements with an Amplifier Accessory The National Instruments PXI-4022 accessory module consists of a high-speed, high-precision amplifier that conditions signals for acquisition by a PXI DMM. With the guarding functionality, you can make 6-wire resistance measurements for resistors connected in parallel on complex printed circuit board layouts or cable test applications. For low-current measurements, the NI PXI-4022 amplifier and high-precision resistors create a feedback current amplifier. This implementation minimizes burden voltages and converts current to voltage, so you can measure picoampere signals with femtoampere noise. For additional information on how to combine this module with PXI Digital Multimeters, visit the PXI-4022 Guard and Current Amplifier link in the Resources section.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
