NI PCI-6733 High-Speed Analog Output -- 1 MS/s, 16-Bit, 8 Channels

  • Print
  • PDF
  • Rich Text
  • 8 hardware-timed digital I/O lines; two 24-bit counters; digital triggering
  • Onboard or external update clock
  • RTSI bus for synchronization with DAQ, motion, and vision products
  • NI-DAQmx driver with configuration utility to simplify configuration and measurements
  • Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET
  • View Data Sheet
  • View Support Resources
The NI PCI-6733 board delivers high-performance, reliable, high-speed analog outputs to meet a wide range of application requirements. It provides eight analog output channels with up to 1 MS/s per channel, 16-bit resolution, and digital triggering. The board uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so you can create custom measurement solutions to test innovative designs. The PCI-6733 is ideal for applications such as stimulus-response tests, including acoustic distortion testing, and simulation, such as three-phase power simulation.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

View Data Sheet | View Pricing and Purchasing Information

Specifications Documents

  • View Data Sheet

Specifications Summary

General
Product Name PCI-6733
Product Family Multifunction Data Acquisition
Form Factor PCI
Part Number 778510-01
Operating System/Target Windows , Real-Time , Linux , Mac OS
Measurement Type Voltage
RoHS Compliant No
Analog Input
Channels 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 8
Resolution 16 bits
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 2.24 mV
Minimum Voltage Range -10 V - 10 V
Minimum Voltage Range Accuracy 2.24 mV
Update Rate 1 MS/s
Current Drive Single 5 mA
Current Drive All 40 mA
Digital I/O
Bidirectional Channels 8
Input-Only Channels 0
Output-Only Channels 0
Timing Hardware
Maximum Clock Rate 10 MHz
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sourcing , Sinking
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Maximum Input Range 0 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 2
Number of DMA Channels 1
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 20 MHz
Minimum Input Pulse Width 50 ns
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 100 ppm
Logic Levels TTL
Physical Specifications
Length 17.5 cm
Width 10.7 cm
I/O Connector 68-pin male SCSI-II type
Timing/Triggering/Synchronization
Triggering Digital

NI PCI-6733 Complete Package

Each NI PCI-6733 requires:

Roll over icons below to learn why you need each item in the package.

1 Connector Block

1 Cable

NI PCI-6733

Software

NI PCI-6733 and Accessories

NI PCI-6733 - 778510-01 Qty $ 1,934 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 322 each
Cable - Shielded
SH68-68-EP Cable (2m) - 184749-02
Select length:
Qty $ 135 each
Change Accessories

Learn about all compatible accessories and get recommendations based on your application needs.

Optional Accessories
Hardware Subtotal: $ 2,391

Software

Note : You should only purchase this device without software if you already own compatible application software.
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Software Subtotal: $ 0

Package Price: $ 2,391

Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

Additional Product Information

  • View Data Sheet