NI PCI-6731 High-Speed Analog Output - 1 MS/s, 16-Bit, 4 Channels

  • Print
  • PDF
  • Rich Text
  • Consider X Series for analog output, multifunction tools with the NI PCIe-6323 or PCIe-6353.
  • 8 digital I/O lines; two 24-bit counters; digital triggering
  • Onboard or external update clock
  • RTSI bus for synchronization with DAQ, motion, and vision products
  • NI-DAQmx driver with configuration utility to simplify configuration and measurements
  • Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET
  • View Data Sheet
  • View Support Resources
The NI PCI-6731 delivers high-performance, reliable, high-speed analog outputs to meet a wide range of application requirements. It provides four analog output channels with up to 1 MS/s per channel, 16-bit resolution, and digital triggering. The board uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so you can create custom measurement solutions to test innovative designs. The PCI-6731 is ideal for applications such as stimulus-response tests, including acoustic distortion testing, and simulation, such as three-phase power simulation.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

View Data Sheet | View Pricing and Purchasing Information

Specifications Documents

  • View Data Sheet

Specifications Summary

Sorry, this content is temporarily unavailable.

NI PCI-6731 Complete Package

Each NI PCI-6731 requires:

Roll over icons below to learn why you need each item in the package.

1 Connector Block

1 Cable

NI PCI-6731

Software

NI PCI-6731 and Accessories

NI PCI-6731 - 778511-01 Qty $ 1,727 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 322 each
Cable - Shielded
SH68-68-EP Cable (2m) - 184749-02
Select length:
Qty $ 135 each
Change Accessories

Learn about all compatible accessories and get recommendations based on your application needs.

Optional Accessories
Hardware Subtotal: $ 2,184

Software

Note : You should only purchase this device without software if you already own compatible application software.
LabVIEW Full Development System for Windows (English) , 1 year SSP - 776670-35 Qty $ 2,699 each
LabVIEW Application Builder for Windows - 776675-35 Qty $ 999 each
Software Subtotal: $ 0

Package Price: $ 2,184

Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

Additional Product Information

  • View Data Sheet