Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6602

8-Channel Counter/Timer with Digital I/O

Configure Page for: Print PDF Rich Text
  • 8 up/down, 32-bit counter/timers
  • 80 MHz maximum source frequency (125 MHz with prescalers)
  • Available for PCI computers
  • Can perform three simultaneous high-speed DMA transfers
  • Digital debouncing filters
  • Up to 32 digital I/O lines (5 V/TTL)
Data Sheet


The 6602 family devices are timing and digital I/O modules for use with PCI computers or PXI/CompactPCI computers. They offer eight 32-bit counter/timers and up to 32 lines of TTL/CMOS-compatible digital I/O. You can perform a wide variety of counter/timer tasks with the 6602 devices, including encoder position measurement, event counting, period measurement, pulse width measurement, pulse generation, pulse train generation and frequency measurement

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Name PCI-6602
Product Family Counter/Timers
Form Factor PCI
Part Number 777531-01
Operating System/Target Real-Time , Linux , Mac OS , Windows
Measurement Type Quadrature encoder , Digital , Frequency
Isolation Type None
RoHS Compliant No
Analog Input
Channels 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 32
Input-Only Channels 0
Output-Only Channels 0
Timing Software
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters Yes
Supports Programmable Power-Up States? No
Current Drive Single 4 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range -0.3 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 8
Number of DMA Channels 3
Buffered Operations Yes
Debouncing/Glitch Removal Yes
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 80 MHz
Minimum Input Pulse Width 6.25 ns
Pulse Generation Yes
Resolution 32 bits
Timebase Stability 50 ppm
Logic Levels TTL
Physical Specifications
Length 17.5 cm
Width 9.9 cm
I/O Connector 68-pin male SCSI-II type
Timing/Triggering/Synchronization
Triggering Digital
Synchronization Bus (RTSI) Yes

NI PCI-6602 Complete Package

Each NI PCI-6602 requires:
1 Connector Block 1 Cable NI PCI-6602 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6602 and Accessories

Hardware Subtotal: $ 1,404
NI PCI-6602 - 777531-01 Qty $ 800 each
Required Accessories
Connector Block - BNC Terminal
BNC-2121 - 778289-01
Qty $ 419 each
Cable - Shielded
SH68-68-D1 Cable (2m) - 183432-02
Select length:
Qty $ 185 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 5 - 10
Package Price: $ 1,404
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »