- Scheduled for obsolescence. For new designs, consider the NI USB-6509.
- 96 bidirectional 5 V/TTL static I/O lines in 8-bit ports
- Built-in screw terminals for easy connectivity
- 2-wire handshake capability
- Known power-up states
- NI-DAQ driver simplifies configuration and measurements
 Data Sheet- New! Compare to similar products
Scheduled for obsolescence. For new designs, consider the NI USB-6509.
For links to these products refer to Related Information on the Resources tab.
The DAQPad-6507 is a 96-bit parallel digital I/O devices for computers with the universal serial bus (USB). It uses four 24-bit programmable peripheral interfaces (PPIs). Each PPI can be further divided into three 8-bit ports. The DAQPad-6507 is very flexible when interfacing to peripherals or other computers. It can operate in either a unidirectional or bidirectional mode and handshake with peripheral equipment. The DAQPad-6507 differs from the DAQPad-6508 in that it has built-in screw terminals instead of a 100 pin I/O connector.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | USB |
|---|
| OS Support | Windows |
|---|
| Analog Input | |
|---|
| Number of Channels | 0 |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 96 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 2.5 mA/240 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | Yes |
|---|
| Supports Pattern I/O? | Yes |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 0 |
|---|
| Physical Specifications | |
|---|
| Length | 22.9 cm |
|---|
| Width | 14.6 cm |
|---|
| I/O Connector | Screw terminals |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
