National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase resolution by 16x; increase sampling speed; and improve accuracy with the 16-bit, 250 kS/s PCI-6229.
Add sensor and high-voltage measurement capability to your E Series device with National Instruments SCC or SCXI signal conditioning. The National Instruments PCI-6025E is a low-cost data acquisition board that uses E Series technology to deliver high-performance and reliable data acquisition capabilities in a wide range of applications. You get up to 200 kS/s, 12-bit performance on 16 single-ended analog inputs. Depending on your type of hard drive, the NI PCI-6025E can stream to disk at rates up to 200 kS/s.
Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices.
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
