- Consider M Series for 16-bit resolution, 250 kS/s, and similar costs with the PCI-6220.
- NIST-traceable calibration certificate and more than 70 signal conditioning options
- LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Basic and Visual Studio .NET integration
- Included NI-DAQmx driver software and additional measurement services
- 8 digital I/O lines, two 24-bit counters
- FREE award-winning global services and support at ni.com/support
Data Sheet
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase resolution by 16x; increase sampling speed; and improve accuracy with the 16-bit, 250 kS/s PCI-6220.
Add sensor and high-voltage measurement capability to your E Series device with National Instruments SCC or SCXI signal conditioning. The National Instruments PCI-6023E is a low-cost data acquisition board that uses E Series technology to deliver high-performance, reliable data acquisition capabilities in a wide range of applications. You get up to 200 kS/s sampling and 12-bit resolution on 16 single-ended analog inputs. Depending on your type of hard drive, the NI PCI-6023E can stream to disk at rates up to 200 kS/s.
Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
| Form Factor | PCI |
| OS Support | Windows, Real-Time, Linux, Mac OS |
| DAQ Product Family | E Series |
| LabVIEW RT Support | Yes |
| Analog Input | |
| Number of Channels | 16 SE/8 DI |
| Sample Rate | 200 kS/s |
| Resolution | 12 bits |
| Simultaneous Sampling | No |
| Maximum Voltage Range | -10..10 V |
| Range Accuracy | 16.504 mV |
| Minimum Voltage Range | -50..50 mV |
| Range Accuracy | 0.106 mV |
| Number of Ranges | 4 |
| On-Board Memory | 512 samples |
| Analog Output | |
| Number of Channels | 0 |
| Current Drive (Channel/Total) | 5 mA |
| Digital I/O | |
| Number of Channels | 8 DIO |
| Timing | Software |
| Logic Levels | TTL |
| Maximum Input Range | 0..5 V |
| Maximum Output Range | 0..5 V |
| Input Current Flow | Sinking, Sourcing |
| Programmable Input Filters | No |
| Output Current Flow | Sinking, Sourcing |
| Current Drive (Channel/Total) | 24 mA/192 mA |
| Watchdog Timer | No |
| Supports Programmable Power-Up States? | No |
| Supports Handshaking I/O? | No |
| Supports Pattern I/O? | No |
| Counter/Timers | |
| Number of Counter/Timers | 2 |
| Resolution | 24 bits |
| Maximum Source Frequency | 20 MHz |
| Minimum Input Pulse Width | 10 ns |
| Logic Levels | TTL |
| Maximum Range | 0..5 V |
| Timebase Stability | 100 ppm |
| GPS Synchronization | No |
| Pulse Generation | Yes |
| Buffered Operations | Yes |
| Debouncing/Glitch Removal | No |
| Number of DMA Channels | 1 |
| Timing/Triggering/Synchronization | |
| Synchronization Bus (RTSI) | Yes |
| Triggering | Digital |
| Physical Specifications | |
| Length | 17.5 cm |
| Width | 10.7 cm |
| I/O Connector | 68-pin male SCSI-II type |
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
Select your application need to see compatible software options for the NI PCI-6023E.
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
|