Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-7334

4-Axis Low-Cost Stepper Motion Controller

Configure Page for: Print PDF Rich Text
  • Quadrature encoder or analog feedback
  • Firmware you can upgrade
  • PXI trigger bus for powerful synchronization with other NI measurement products
  • 3D linear interpolation for coordinated, multiaxis motion control
  • Four 12-bit ADCs with ±10 V range
Compare to similar products
Configure Complete PXI System
Data Sheet

The National Instruments PXI-7334 is a low-cost 4-axis stepper motion controller. You can use theNI PXI-7334 for integrated, stepper motion controller applications. With the same API as high-performance stepper/servo controllers, the PXI-7334 offers stepper-only control at a lower cost.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
778444-01 NI PXI-7334 12 - 20 $ 1,349

Each NI PXI-7334 requires: 1 Cable, 1 Connector Block

NI PXI-7334 Cable Connector Block
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
186380-0R5 SHC68-C68-S Cable (0.5m)
NI Recommended		 10 - 15 $ 149
186380-02 SHC68-C68-S Cable (2m) 10 - 15 $ 149
186381-0R5 SH68-C68-S Cable (0.5m) 10 - 15 $ 89
186381-02 SH68-C68-S Cable (2m) 5 - 10 $ 99
186381-01 SH68-C68-S Cable (1m) 10 - 15 $ 89
189041-02 SHC68-NT-S Cable Assembly (2m) 5 - 10 $ 49
Step 3: Select Connector Block
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
D-Sub Connectors
778558-01 NI UMI-7774
NI Recommended		 10 - 15 $ 749
778556-01 NI UMI-7772 10 - 15 $ 639
Power Drives
778003-01 MID-7602, 120 VAC 12 - 20 $ 2,199
778003-05 MID-7602, 240 VAC Call $ 2,199
777936-01 MID-7604, 120 VAC 12 - 20 $ 2,699
777936-04 MID-7604, 240 VAC Call $ 2,699
780098-01 P70360 Stepper Drive 12 - 20 $ 699
780097-01 P70530 Stepper Drive 10 - 15 $ 349
Screw Terminal Connectors
777978-02 NI UMI-7764 (20 MHz Encoder) 5 - 10 $ 319
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Name PXI-7334
Product Family Motion Control
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Operating System/Target Windows , Real-Time
LabVIEW RT Support Yes
Included Motion Software NI Motion
I/O Connector 68-pin VHDCI female
Motion Hardware Controller
Number of Axes 4
Motor/Axis Type stepper , p-command servo
Controller
Linear Interpolation Yes
Circular Interpolation Yes
Spherical Interpolation Yes
Helical Interpolation Yes
Blending Yes
Profile Type S-Curve , Trapezoidal
Contouring No
Electronic Gearing No
Motion Profile Import from CAD .dfx file No
On-board programming No
Brushless Servo Motor Commutation No
Position Capture single
Breakpoints single
Control Loop Rate 1 axis at 62.5 us
Number of PWM Channels 2
Number of Digital IO Channels 32
Number of Analog Input Channels 8
Maximum Step Output Rate 4 MHz
Maximum Encoder Input Rate 20 MHz
Feedback Type analog , encoder
Physical Specifications
Length 16 cm
Width 10 cm
Minimum Operating Temperature 0 °C
Maximum Operating Temperature 55 °C

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »