32-channel optically isolated solid-state relays 2 ms actuation time Consider the NI PXI-2576 for multibank multiplexing in PXI at a cheaper cost per channel Fully software programmable 8 banks of 4x1 (1-wire) multiplexers Switching capacity of 200 mA at
Data Sheet |
Configure System
The National Instruments SCXI-1163R includes 32 normally open, or Form A, optically isolated solid-state relays, arranged into eight banks of four relays with one common pole for each bank. You can use the NI SCXI-1163R to switch high-voltage loads, up to 240 VAC/VDC and up to 200 mA. You can easily integrate SCXI-1163R modules into existing SCXI systems without additional DAQ devices or cabling. For similar functionality in PXI, consider the NI PXI-2576 which provides 16 banks of 4x1 (2-wire) multiplexers at a cheaper cost per relay.
You have selected the United States as the country where you will use the product(s) (change ).
Additional Product Information
Specifications Documents
Specifications Summary
General Form Factor SCXI OS Support Windows, Real-Time, Linux LabVIEW RT Support Yes Switches Switch Type Multiplexer Relay Type Solid State Connectivity Terminal Block Product Certifications C-Tick, CAN/CSA, CE, FCC Part 15, IEC, UL - Product Safety Multiplexer Configurations 8 banks of 4x1, 1-wire Maximum Switching Voltage DC (Pollution Degree 2) 240 VDC Maximum Switching Voltage AC 240 Vrms Maximum Switching Current 200 mA Maximum Carry Current 200 mA Maximum Switching Power 48 W Bandwidth 1 MHz Relay Count Tracking No Voltage Category CAT II Path Resistance (Typical) 8 Ohm Scan Rate 750 cycles/s Timing/Triggering/Synchronization Synchronization Bus (RTSI) Yes T-clock Capability No Triggering Digital External Clocking No
Select your application need to see compatible software options for the NI SCXI-1163R.
Graphical Programming
Text-Based Programming
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
Graphical Programming
Text-Based Programming
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
Driver Software
Data Sheet |
Configure System 
