- Consider M Series for 18-bit resolution, 625 kS/s, and lower costs with the PCI-6281.
- FREE award-winning global services and support -- ni.com/support
- NIST-traceable calibration certificate and more than 70 signal conditioning options
- Included Traditional NI-DAQ (Legacy) driver software
- Superior LabVIEW, LabWindows/CVI, and Measurement Studio integration for VB and VS .NET
- Two 12-bit analog outputs, 8 digital I/O lines, two 24-bit counters
 Data Sheet
most popular item(s) |
National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Quadruple your resolution, increase sampling rates 30 times, and increase your accuracy with the 18-bit, 625 kS/s PCI-6281.
Add sensor and high-voltage measurement capability to your E Series device with SCC or SCXI signal conditioning. The National Instruments 6011E (MIO-16XE-50) and 6012E (AI-16XE-50) families use E Series technology to deliver high-performance, reliable data acquisition capabilities to meet a wide range of application requirements. You get up to 20 kS/s, 16-bit performance on 16 single-ended analog inputs. Depending on your type of hard drive, these boards can stream to disk at rates up to 20 kS/s.
Complete your DAQ system with NI signal conditioning to measure virtually any sensor and voltage.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | ISA |
|---|
| OS Support | Windows |
|---|
| DAQ Product Family | E Series |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 20 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 1.443 mV |
|---|
| Minimum Voltage Range | 0..100 mV |
|---|
| Range Accuracy | 0.052 mV |
|---|
| Number of Ranges | 8 |
|---|
| On-Board Memory | 512 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 20 kS/s |
|---|
| Resolution | 12 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 7.208 mV |
|---|
| Minimum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 7.208 mV |
|---|
| Current Drive (Channel/Total) | 5 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Number of DMA Channels | 1 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Digital |
|---|
| Physical Specifications | |
|---|
| Length | 33.8 cm |
|---|
| Width | 9.9 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
