Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-6703

Static Analog Voltage Output -- 16-Bit

  • 16 voltage outputs
  • ±10 V range
  • User-defined power-up states
  • 8 digital I/O lines (5 V TTL/CMOS)
  • NI-DAQmx software simplifies configuration and measurements

The NI PCI-6703 is a 16-bit static-update analog output board. It features 16 voltage outputs as well as eight digital I/O lines.

NI PCI-6703 Complete Package

Each NI PCI-6703 requires:

1 Connector Block 1 Cable NI PCI-6703 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6703 and Accessories

Hardware Subtotal: $ 1,567
NI PCI-6703 - 778316-01 Qty $ 1,099 each
Connector Block - Screw Terminal
SCB-68 - 776844-01
Qty $ 299 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Cable - Shielded
SH68-68-D1 (2m) - 183432-02
Qty $ 169 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0
NI LabVIEW Full Development System for Windows (English) - 776670-35 Qty $ 2,599 each
Note : You should only purchase this device without software if you already own compatible application software. View Compatible Application Software | Compare to LabVIEW SignalExpress Limited Edition [Close]
Note : This software is required to use LabVIEW Application Builder for Windows. You should purchase LabVIEW Application Builder for Windows without a LabVIEW Development System only if you already own LabVIEW Base or Full for Windows version 8.6.1 or later. Upgrade Your Development System Now [Close]
LabVIEW Application Builder for Windows (English) - 776675-35 Qty $ 999 each
Note : NI recommends this software for use with your hardware to maximize your productivity. [Close]
Change Software
Learn about other compatible software, OS, and language options.
Package Price: $ 1,567
  Add to Cart >>
Guarantee your price for 30 days (learn more)Instant Quote
 

You have selected United States as the country where you will use this product(s) (change)

Specifications Documents


Specifications Summary

General
Product Name PCI-6703
Product Family Multifunction Data Acquisition
Form Factor PCI
Operating System/Target Linux , Real-Time , Windows
RoHS Compliant Yes
Analog Input
Channels 0 , 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 16
Resolution 16 bits
Max Voltage 10.100 V
Maximum Voltage Range 10.100 , -10.100 V
Maximum Voltage Range Accuracy 1 mV
Minimum Voltage Range 10.100 , -10.100 V
Minimum Voltage Range Accuracy 1 mV
Current Drive Single 10 mA
Current Drive All 160 mA
Digital I/O
Bidirectional Channels 8
Input-Only Cannels 0
Output-Only Channels 0
Number of Channels 8 , 0 , 0
Timing Software
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 16 mA
Current Drive All 128 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range 5.0 , 0.0 V
Maximum Output Range 5.0 , 0.0 V
Counter/Timers
Counters 0
Physical Specifications
Length 17.500 cm
Width 9.900 cm
I/O Connector 68-pin male SCSI-II type

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support