Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI DAQCard-6715

High-Speed Analog Output for PCMCIA -- 12-Bit, 1 MS/s per Channel

Configure Page for: Print PDF Rich Text
  • 8 channels
  • 1 MS/s maximum update rate
  • 8 (5 V TTL/CMOS) digital I/O lines
  • Digital triggering and external clocking
  • 2 up/down counter/timers, 24-bit resolution
  • NI-DAQmx driver with configuration utility to simplify configuration and measurements
Data Sheet


The NI DAQCard-6715 is a 12-bit, high-speed analog output PCMCIA card. It provides up to 1 MS/s per channel on eight analog outputs. In addition, the device features eight digital I/O lines; two 24-bit, 20 MHz counter/timers; and digital triggering capability.

Note to Windows Vista Users
DAQCard (PCMCIA) support for Windows Vista is not available for NI data acquisition (DAQ) devices. For laptop-based measurements with 16-bit resolution, consider NI M Series USB DAQ.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Name DAQCard-6715
Product Family Multifunction Data Acquisition
Form Factor PCMCIA
Part Number 778146-01
Operating System/Target Windows
RoHS Compliant No
Analog Input
Channels 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 8
Resolution 12 bits
Max Voltage 10 V
Maximum Voltage Range -10 V - 10 V
Maximum Voltage Range Accuracy 8.62 mV
Minimum Voltage Range -10 V - 10 V
Minimum Voltage Range Accuracy 8.62 mV
Update Rate 1 MS/s
Current Drive Single 5 mA
Current Drive All 20 mA
Digital I/O
Bidirectional Channels 8
Input-Only Channels 0
Output-Only Channels 0
Timing Software
Logic Levels TTL
Input Current Flow Sinking , Sourcing
Output Current Flow Sinking , Sourcing
Programmable Input Filters No
Supports Programmable Power-Up States? No
Current Drive Single 24 mA
Current Drive All 192 mA
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? No
Maximum Input Range 0 V - 5 V
Maximum Output Range 0 V - 5 V
Counter/Timers
Counters 2
Buffered Operations Yes
Debouncing/Glitch Removal No
GPS Synchronization No
Maximum Range 0 V - 5 V
Max Source Frequency 1 MHz
Minimum Input Pulse Width 50 ns
Pulse Generation Yes
Resolution 24 bits
Timebase Stability 50 ppm
Logic Levels TTL
Physical Specifications
Length 8.56 cm
Width 5.4 cm
Height 0.5 cm
I/O Connector 68-pin female Honda
Timing/Triggering/Synchronization
Triggering Digital

NI DAQCard-6715 Complete Package

Each NI DAQCard-6715 requires:
1 Connector Block 1 Cable NI DAQCard-6715 Software

Roll over icons above to learn why you need each item in the package.

NI DAQCard-6715 and Accessories

Hardware Subtotal: $ 2,178
NI DAQCard-6715 - 778146-01 Qty $ 1,720 each
Required Accessories
Connector Block - Screw Terminal
SCB-68A - 782536-01
Qty $ 319 each
Cable - Shielded
SHC68-68-EPM Cable (2m) - 192061-02
Select length:
Qty $ 139 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 5 - 10
Package Price: $ 2,178
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »