NI PCI-6713

12-Bit, 1 MS/s per Channel Analog Output Board

[+] Enlarge Picture

8 channels
1 MS/s maximum update rate
8 (5 V TTL/CMOS) digital I/O lines
Digital triggering and external clocking
2 up/down counter/timers, 24-bit resolution
NI-DAQmx driver with configuration utility to simplify configuration and measurements

Overview
Specifications
Pricing
Services
Resources

The NI PCI-6713 is a 12-bit high-speed analog output board. It provides up to 1 MS/s per channel on eight analog outputs. In addition, the board features eight digital I/O lines; two 24-bit, 20 MHz counter/timers; and digital triggering capability.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-6713 Complete Package

Each NI PCI-6713 requires:


1 Connector Block		1 Cable		NI PCI-6713		Software

Roll over icons above to learn why you need each item in the package.

NI PCI-6713 and Accessories

Hardware Subtotal: $ 1,817

NI PCI-6713 - 777741-01	Qty	$ 1,399 each
Connector Block - Screw Terminal SCC-68 - 779475-01	Qty	$ 299 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]
Cable - Shielded SH68-68-EP (2m) - 184749-02	Qty	$ 119 each
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Select Accessories. [Close]
Warning : You removed a required accessory. If you would like to reselect it or see other options, click Change Accessories. [Close]

Change Accessories Learn about all compatible accessories and get recommendations based on your application needs.

Software

Software Subtotal: $ 0

NI LabVIEW Full Development System for Windows (English) - 776670-35	Qty	$ 2,599 each

Note : You should only purchase this device without software if you already own compatible application software. View Compatible Application Software \| Compare to LabVIEW SignalExpress Limited Edition [Close]
Note : This software is required to use LabVIEW Application Builder for Windows. You should purchase LabVIEW Application Builder for Windows without a LabVIEW Development System only if you already own LabVIEW Base or Full for Windows version 8.6.1 or later. Upgrade Your Development System Now [Close]
LabVIEW Application Builder for Windows (English) - 776675-35	Qty	$ 999 each
Note : NI recommends this software for use with your hardware to maximize your productivity. [Close]
Change Software Learn about other compatible software, OS, and language options.

Estimated Shipping Days:

Package Price: $ 1,817

You have selected United States as the country where you will use this product(s) (change)

Additional Product Information

View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

General
Product Name	PCI-6713
Product Family	Multifunction Data Acquisition
Form Factor	PCI
Operating System/Target	Linux , Mac OS , Real-Time , Windows
RoHS Compliant	No
Analog Input
Channels	0 , 0
Single-Ended Channels	0
Differential Channels	0
Analog Output
Channels	8
Resolution	12 bits
Max Voltage	10.0 V
Maximum Voltage Range	10.0 , -10.0 V
Maximum Voltage Range Accuracy	8.620 mV
Minimum Voltage Range	10.0 , -10.0 V
Minimum Voltage Range Accuracy	8.620 mV
Update Rate	1 MS/s
Current Drive Single	5 mA
Current Drive All	40 mA
Digital I/O
Bidirectional Channels	8
Input-Only Cannels	0
Output-Only Channels	0
Number of Channels	8 , 0 , 0
Timing	Software
Logic Levels	TTL
Input Current Flow	Sourcing , Sinking
Output Current Flow	Sinking , Sourcing
Programmable Input Filters	No
Supports Programmable Power-Up States?	No
Current Drive Single	24 mA
Current Drive All	192 mA
Watchdog Timer	No
Supports Handshaking I/O?	No
Supports Pattern I/O?	No
Maximum Input Range	5.0 , 0.0 V
Maximum Output Range	5.0 , 0.0 V
Counter/Timers
Counters	2
Number of DMA Channels	1
Buffered Operations	Yes
Debouncing/Glitch Removal	No
GPS Synchronization	No
Maximum Range	5.0 , 0.0 V
Max Source Frequency	20 MHz
Minimum Input Pulse Width	50 ns
Pulse Generation	Yes
Resolution	24 bits
Timebase Stability	100.0 ppm
Logic Levels	TTL
Physical Specifications
Length	17.500 cm
Width	10.700 cm
I/O Connector	68-pin male SCSI-II type

View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Learn More About Calibration Services

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »