ER-8/16 |
The ER-8 and ER-16 (ER-8/16) are general-purpose, electromechanical relay accessories from National Instruments with 8 or 16 independent single-pole double-throw (SPDT), also called Form C, nonlatching relays. The relays can switch up to 3 A at 30 VDC or 250 Vrms. Each relay has a Normally Closed (NC), Normally Open (NO), and Common (COM) terminal. You can use the ER-8/16 with National Instruments 6503 (DIO-24), 6533 (DIO-32HS), or 6508 (DIO-96) boards using a single cable. By using the SC-205x Series cable adapters, you can use the ER-8/16 with other National Instruments multifunction boards with digital outputs. A plastic box casing protects the user from exposure to potential electrical hazards. You have selected the United States as the country where you will use the product(s) (change). Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical SupportSelect your application need to see compatible software options for the ER-8/16.
Driver Software |
