Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI SCC-68 Manuals

Results: 1 - 5 of 5
  • Read Me First: Safety and Electromagnetic Compatibility This document contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
  • Technical Support Information This reference card contains links to the most current technical support resources.
  • SCC-68 User Guide and Specifications The SCC-68 is an I/O connector block for easy signal connection to a National Instruments M Series or E Series data acquisition (DAQ) device. This manual describes the SCC-68 and explains how to connect and use the connector block with National Instruments X Series, M Series, or E Series DAQ devices.
  • Installing an EMI Noise-Suppression Ferrite on the External Power Supply Note to Users This note instructs users on the proper way to install the EMI noise-suppression ferrite on your external power supply cable. In order to comply with electromagnetic compatibility requirements, you must install the ferrite shipped with the power supply.
  • SCC Quick Start Guide This document explains how to install, configure, and set up National Instruments SCC modules. This document assumes you have already installed, configured, and tested the data acquisition (DAQ) device you will connect to the SC-2345/2350 carrier.
Results: 1 - 5 of 5