Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

SCXI-1320 Manuels

Results: 1 - 10 of 13
  • Guide d'initiation DAQ Le Guide d'initiation DAQ décrit comment vous assurer que votre périphérique NI d'acquisition de données (DAQ) fonctionne correctement en utilisant Measurement & Automation Explorer (MAX), en configurant une tâche avec l'Assistant DAQ ainsi que comment démarrer votre application.
  • Guide de démarrage SCXI (document multilingue : anglais, français et allemand) Ce document explique comment installer et configurer des modules de conditionnement de signaux SCXI dans les châssis SCXI-1000, SCXI-1001, SCXI-1000DC ou des châssis combinés PXI/SCXI, vérifier que le module et le châssis fonctionnent correctement et configurer des systèmes multichâssis. Il décrit également l’utilisation du logiciel NI-DAQmx avec des produits de conditionnement de signaux intégré et SCXI. Ce document présume que vous avez déjà installé, configuré et testé le logiciel de votre application NI et du driver, ainsi que le périphérique d’acquisition de données (DAQ) auquel vous allez connecter le module SCXI.
  • Read Me First: Safety and Electromagnetic Compatibility This document contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
  • DAQ Getting Started Guide The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, and how to get started with your application.
  • DAQ Getting Started, Read Me First: NI-DAQmx and DAQ Device Installation Guide (Multilingual:English, French, German, Japanese, Korean, Simplified Chinese) This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) device, and confirm the device is operating properly.
  • SCXI Quick Start Guide (Multilingual English, French,& German) This SCXI Quick Start Guide contains English, French, and German languages. This document explains how to install and configure SCXI signal conditioning modules in SCXI-1000, SCXI-1001, SCXI-1000DC, and PXI/SCXI combination chassis, confirm the module and chassis are operating properly, and set up multichassis systems. It also describes the NI-DAQmx software relative to SCXI and integrated signal conditioning products.This document assumes you have already installed, configured, and tested your NI application and driver software, and the data acquisition (DAQ) device to which you will connect the SCXI module.
  • SCXI Quick Start Guide (Multilingual Japanese, Korean, Simplified Chinese) This SCXI Quick Start Guide contains Japanese, Korean, and Simplified Chinese languages. This document explains how to install and configure SCXI signal conditioning modules in SCXI-1000, SCXI-1001, SCXI-1000DC, and PXI/SCXI combination chassis, confirm the module and chassis are operating properly, and set up multichassis systems. It also describes the NI-DAQmx software relative to SCXI and integrated signal conditioning products.This document assumes you have already installed, configured, and tested your NI application and driver software, and the data acquisition (DAQ) device to which you will connect the SCXI module.
  • SCXI-1320 High-Voltage Terminal Block Installation Guide and Specifications This guide describes how to install and use the SCXI-1320 terminal block with your SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, or SCXI-1126 module.
  • SCXIbus System Specification This specification describes the physical, electrical, and timing requirements for the SCXIbus. The system objectives of the SCXIbus specification are as follows: • To specify the system characteristics that allow a module to control other modules or be controlled via the serial bus • To specify the electrical and mechanical system characteristics required to design modules that will operate in the SCXIbus system The Physical Requirements section describes the physical dimensions of an SCXI module, the positioning of the metral SCXIbus connector, and cooling information. The SCXIbus Connector section contains the pinout and a brief description of the SCXIbus backplane lines and requirements for module connections to these lines. The Timing Requirements and Specifications section contains a complete description and specification of the serial communications protocol and SCANCON timing.
  • SCXI-1320 High-Voltage Terminal Block Calibration Procedure This document contains information and step-by-step instructions for verifying the performance of the temperature sensor on the National Instruments SCXI-1320 high-voltage terminal block. This temperature sensor is for cold-junction compensation of thermocouples on the terminal block.
Results: 1 - 10 of 13