Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

SCXI-1339 Manuals

Results: 1 - 10 of 12
  • DAQ Getting Started Guide The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, and how to get started with your application.
  • Read Me First: Safety and Electromagnetic Compatibility This document contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
  • DAQ Getting Started, Read Me First: NI-DAQmx and DAQ Device Installation Guide (Multilingual:English, French, German, Japanese, Korean, Simplified Chinese) This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) device, and confirm the device is operating properly.
  • SCXI Quick Start Guide (Multilingual English, French,& German) This SCXI Quick Start Guide contains English, French, and German languages. This document explains how to install and configure SCXI signal conditioning modules in SCXI-1000, SCXI-1001, SCXI-1000DC, and PXI/SCXI combination chassis, confirm the module and chassis are operating properly, and set up multichassis systems. It also describes the NI-DAQmx software relative to SCXI and integrated signal conditioning products.This document assumes you have already installed, configured, and tested your NI application and driver software, and the data acquisition (DAQ) device to which you will connect the SCXI module.
  • SCXI Quick Start Guide (Multilingual Japanese, Korean, Simplified Chinese) This SCXI Quick Start Guide contains Japanese, Korean, and Simplified Chinese languages. This document explains how to install and configure SCXI signal conditioning modules in SCXI-1000, SCXI-1001, SCXI-1000DC, and PXI/SCXI combination chassis, confirm the module and chassis are operating properly, and set up multichassis systems. It also describes the NI-DAQmx software relative to SCXI and integrated signal conditioning products.This document assumes you have already installed, configured, and tested your NI application and driver software, and the data acquisition (DAQ) device to which you will connect the SCXI module.
  • SCXIbus System Specification This specification describes the physical, electrical, and timing requirements for the SCXIbus. The system objectives of the SCXIbus specification are as follows: • To specify the system characteristics that allow a module to control other modules or be controlled via the serial bus • To specify the electrical and mechanical system characteristics required to design modules that will operate in the SCXIbus system The Physical Requirements section describes the physical dimensions of an SCXI module, the positioning of the metral SCXIbus connector, and cooling information. The SCXIbus Connector section contains the pinout and a brief description of the SCXIbus backplane lines and requirements for module connections to these lines. The Timing Requirements and Specifications section contains a complete description and specification of the serial communications protocol and SCANCON timing.
  • Guide, SCXI-1181K Custom Module Assembly This guide documents the contents of your SCXI-1181K custom module assembly kit and includes illustrations of the circuit board specifications and the module assembly.
  • Getting Started with SCXI This guide is a beginner’s handbook to the installation, configuration, and use of the National Instruments Signal Conditioning eXtensions for Instrumentation (SCXI) chassis, modules, and associated data acquisition (DAQ) devices. This guide is an introduction to SCXI, not a complete reference. Advanced users should refer to the appropriate hardware and software manuals for further information.
  • Technical Support Information This reference card contains links to the most current technical support resources.
  • NI Switches Getting Started Guide for NI SCXI Switch Modules This document explains how to install, configure, and test a National Instruments SCXI switch module. This document contains information about the NI-DAQ driver software relative to NI switch modules. For detailed information about the features and programming options specific to the switch module, refer to the NI Switches Help at Start»All Programs»National Instruments»NI-SWITCH»Documentation.
Results: 1 - 10 of 12