Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

PCI-6602 Manuals

Results: 1 - 8 of 8
  • NI 660x User Manual This manual describes the electrical and mechanical aspects of the National Instruments NI 6601, NI 6602, and NI 6608 devices, and contains information about device operation and programming.
  • Read Me First: Safety and Electromagnetic Compatibility This document contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
  • DAQ Getting Started Guide The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, and how to get started with your application.
  • DAQ Getting Started, Read Me First: NI-DAQmx and DAQ Device Installation Guide (Multilingual:English, French, German, Japanese, Korean, Simplified Chinese) This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) device, and confirm the device is operating properly.
  • NI 660x Specifications This document lists specifications for the NI 660x devices. These specifications are typical at 25 °C unless otherwise noted. Refer to the NI 660x User Manual for more information about the NI 660x devices.
  • NI 660X Register-Level Programmer Manual The NI 660X Register-Level Programmer Manual describes the programmable features of the National Instruments 660X devices. This document is necessary for programmers who use platforms not supported by NI-DAQ. This manual contains information necessary for the register-level programming of NI 660X devices.
  • NI 6601/6602 Calibration Procedure This document contains information and instructions for calibrating the National Instruments 6601/6602 data acquisition devices.
  • Traditional NI-DAQ (Legacy) Installation Guide This document explains how to install the Traditional NI-DAQ (Legacy) driver software. It assumes that you have the Traditional NI-DAQ (Legacy) CD.
Results: 1 - 8 of 8