NI PCI-7390 User Manual and Specifications
This manual describes the electrical and mechanical aspects of the NI PCI-7390 controller and contains information concerning its installation and operation. The NI PCI-7390 is a position-command (p-command) stepper motion controller with isolation designed for use with drives that support Edition Date: November-2005 URL: http://digital.ni.com/manuals.nsf/websearch/1DF511AF12EF033A862570D20075A850

DB9M/DB15/DB25M Pigtail Cable Pinout Guide
The National Instruments DB9M, DB15M, and DB25M Pigtail cables are 9-, 15-, and 25-pin male DSUB cables for connecting a variety of devices to your National Instruments product. The following table lists the color-coded pin assignments for these cables, according to the number of pins and part Edition Date: March-2004 URL: http://digital.ni.com/manuals.nsf/websearch/190070331975DA9F86256E5A006EFEEA

MCA-7724 Motion Axis Router User Guide
The MCA-7724 Motion Axis Router reroutes the signals from your motion controller into separate connectors that connect to different motion accessories. The router allows you to connect one, two, three, and four axis drives and accessories to a controller. Edition Date: April-2001 URL: http://digital.ni.com/manuals.nsf/websearch/6300670B70A91A9E86256A2C00507FBD

68VHDCI-50F SSR 8, 16, 24 Channel Cable Adapter Installation Guide
The 68VHDCI-50F SSR 8, 16, 24 Channel Cable Adapter allows you to connect the digital I/O port of your National Instruments 7344, 7314, or 7324 series motion controller to a third-party SSR (solid-state relay) backplane. National Instruments recommends using the SHC68-C68-S cable (part number Edition Date: October-2000 URL: http://digital.ni.com/manuals.nsf/websearch/EC673C14A4B329C18625696D0078ADBF

DIN-Rail/Wall Mounting Kit Installation Guide
The DIN-rail/wall mounting kit allows you to mount a variety of National Instruments accessories to a DIN rail, wall, or any flat surface. This installation guide lists the contents of your kit and contains instructions for installing the DIN-rail mounting brackets and wall mounting brackets. Edition Date: November-1999 URL: http://digital.ni.com/manuals.nsf/websearch/7D0099AD69AA783B8625680B006F7126

68M-50F Step/Servo Bulkhead Cable Adapter User Guide
Using the 68M-50F step/servo bulkhead cable adapter, you can connect a 68-pin motion controller to a 50-pin motion accessory, or you can connect a 50-pin ValueMotion controller to a 68-pin motion accessory. You set switches to configure the adapter for stepper or servo operation, as well as to set Edition Date: August-1999 URL: http://digital.ni.com/manuals.nsf/websearch/7C919C2F31850C82862567BD0068DA60