|
Differential Digital Flying Lead Cable User Guide (Multilingual)
This guide explains how to set up and use the NI SHB12X-H3X24 cable with differential NI digital waveform generator/analyzer modules.
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/80D39EFF8443321F8625736900419132
|
|
NI CB-2162 User Guide (Multilingual)
The NI CB-2162 is a connector block and prototyping board for National Instruments digital waveform generator/analyzer modules. The NI CB-2162 provides an easy way to terminate digital I/O (DIO) and control channels, connect to other devices for testing and debugging, develop and interface to
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/1803CDCB1832AD078625736900416514
|
|
NI CB-2162 ユーザガイド
NI CB-2162は、NIデジタル波形発生器/アナライザモジュール用の端子台およびプロトタイプ作成ボードです。 NI SMB-2163を使用すると、テストおよびデバッグのために別のデバイスと接続し、プロトタイプ作成回路を開発し接続することが簡単になります。このガイ
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/62E00E622456A3C8862573840074A647
|
|
NI Digital Waveform Generator/Analyzer Getting Started Guide (Multilingual)
This document explains how to install, configure, and test a National Instruments digital waveform generator/analyzer. This document applies specifically to the NI 654x, NI 655x, and NI 656x families of devices. For more information on the NI 654X/655X/656X, such as features and programming, refer
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/6CDBC5A8EADCE0818625736900411211
|
|
NI PXIe/PCIe-6536/6537 Specifications (Multilingual)
This document provides the specifications for the NI PCIe-6536/6537. Typical values are representative of an average unit operating at room temperature. Specifications are subject to change without notice. For the most recent NI 6536/6537 specifications, visit ni.com/manuals
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/906B148A0F455765862573690041C6BE
|
|
NI PXIe/PCIe-6536/6537 仕様
このドキュメントは、NI PCIe-6536/6537の仕様を記載します。標準値は、室温で動作する平均単位です。仕様は事前の通知なしに変更されることがあります。最新のNI 5402/5406の仕様については、ni.com/manualsをご覧ください。
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/4CC94D4DEE48CF228625737F007960D7
|
|
NI SMB-2163 User Guide (Multilingual)
This guide explains how to set up and use the NI SMB-2163 single-ended digital I/O (DIO) accessory with NI single-ended digital waveform generator/analyzer modules.
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/208795FF7754BC8D86257369004135A5
|
|
NI SMB-2163 ユーザガイド
このガイドでは、NIシングルエンドデジタル波形発生器/アナライザモジュールで、NI SMB-2163シングルエンドデジタルI/O(DIO)アクセサリを設定および使用する方法を説明します。
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/ADE95E489EF56EC08625737D0075F6D1
|
|
Single-Ended Digital Flying Lead Cable User Guide (Multilingual)
The NI SHC68-H1X38 cable is a single-ended cable that breaks out each NI digital waveform generator/analyzer signal into two 0.1 inch header receptacles, one receptacle each for the signal and ground. The NI SHC68-H1X38 cable provides an easy way to connect NI single-ended high-speed digital
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/791888891CF82DEC862573540061818B
|
|
差動デジタルフライングリードケーブルユーザガイド
このガイドは、差動NI デジタル波形発生器/ アナライザモジュールでNI SHB12X-H3X24 ケーブルを設定および使用する方法について説明します。
Edition Date:
November-2007
URL: http://digital.ni.com/manuals.nsf/websearch/F9C2ADE4CF0B6BA686257387001C2792
|