VXI/VME-PCI8022 For Solaris 2.x Installation Guide
Quick Start You can use this Quick Start section as a guide to quickly configure and operate your VXI or VME system using the PCI-MXI-2 or PCI-MXI-2 Universal and the VXI-MXI-2 or VME-MXI-2. Documentation For more information, or to try a different configuration, refer to the appropriate hardware Edition Date: September-2002 URL: http://digital.ni.com/manuals.nsf/websearch/F1B4310FB94D796886256C250072EFE0

Getting Started with Your PC-Based MXI-2 Interface for Windows
This manual contains instructions for installing and configuring the National Instruments PCI-based MXI-2 interface kit for Windows. This manual is meant to be used with the MXI-2 Configuration Reference Manual. Your kit contains either a VXI-MXI-2 or VME-MXI-2, which plugs into your VXI or VME Edition Date: August-2002 URL: http://digital.ni.com/manuals.nsf/websearch/AB288346CAFDFBD886256C0E007A1321

Getting Started with Your VXIpc Embedded Controller for VxWorks
Use this manual to get started with the VXIpc embedded computers and the NI-VXI/NI-VISA software for VxWorks. This manual summarizes the setup instructions and default settings for the hardware and software. You may find that these sections contain as much information as you need to get started Edition Date: June-2002 URL: http://digital.ni.com/manuals.nsf/websearch/750DAD479BA2B54C86256BE4006A6D1A

Read Me First: 2.5 Inch Flash Drive Removal/Installation Instructions
This document tells you how to remove the hard drive from the VXIpc 770/870B Series controller and how to install the hard drive in the VXIpc 770/870B Series controller. Edition Date: June-2002 URL: http://digital.ni.com/manuals.nsf/websearch/D4822E212FE5470F86256BDB00678FB3

Read Me First: Removable ATA Flash PC Card
The Flash drive included in this kit is intended only for the following uses. Boot Device for Real-Time operating systems only (Linux, VxWorks). • Additional storage for any operating system. Edition Date: June-2002 URL: http://digital.ni.com/manuals.nsf/websearch/D4FC88AAAB09500186256BD80076550F

GPIB-VXI/C User Manual and Specifications
This manual contains information you need to use the GPIB-VXI/C in your VXIbus system. It describes the function and behavior of GPIB-VXI/C units configured with the standard user firmware option. Edition Date: May-2002 URL: http://digital.ni.com/manuals.nsf/websearch/A18EC7BDB656BFFE86256BCD006991A3

Getting Started with Your PCI-MXI-2 and the NI-VXI/NI-VISA Software for Linux
This manual contains instructions for installing and configuring the National Instruments PCI-MXI-2 kits for Linux. The VXI MXI-2 kit includes a VXI-MXI-2 module that plugs into a VXI mainframe and links your PCI-based computer to the VXIbus. The VME MXI-2 kit includes a VME-MXI-2 that plugs into a Edition Date: May-2002 URL: http://digital.ni.com/manuals.nsf/websearch/C6C258048172145F86256BC9004B40C3

Getting Started with the VXIpc 770/870/870B Series and the NI-VXI/NI-VISA Software for Linux
Use this manual to get started with the VXIpc embedded computers and the NI-VXI/NI-VISA software for Linux. This manual summarizes the setup instructions and default settings for the hardware and software. Edition Date: May-2002 URL: http://digital.ni.com/manuals.nsf/websearch/CCB964AB7B79ACD286256BCA00523C83

Memory Upgrade Kit for NI 8171 and VXIpc 770/870B Series Controllers
This document describes the correct BIOS versions for the NI 8171 and VXIpc 770/870B Series controllers. It also explains where to find the BIOS files. Edition Date: May-2002 URL: http://digital.ni.com/manuals.nsf/websearch/DD470F57D45B3CA886256BAD005D33E5

NI-VXI/NI-VISA for the PCI-MXI-2 for Linux Installation Guide
This installation guide describes system requirements, gives installation instructions, and includes support information for NI-VXI/NI-VISA for the PCI-MXI-2 interface for the Linux operating system. Edition Date: May-2002 URL: http://digital.ni.com/manuals.nsf/websearch/7B8B0375ECF4681B86256BA3006A3F4A