Read Me First: Safety and Electromagnetic Compatibility
This document contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies. Edition Date: February-2008 URL: http://digital.ni.com/manuals.nsf/websearch/36414F659C67A10B862573D7006BAEA7

はじめにお読みください: 安全対策と電磁両立性について
このドキュメントには、ハードウェアの安全対策および電磁両立性（EMC）に関する情報が記載されています。 Edition Date: February-2008 URL: http://digital.ni.com/manuals.nsf/websearch/5E5967295810BAE1862573E9006F6884

SC-2345/2350 Carrier User Manual and Specifications
This document describes how to install and configure the SC-2345/2350 carrier. The SC-2345/2350 carrier transfers signals to and from 68-pin E/M Series data acquisition (DAQ) devices. When used with SCC Series modules and a shielded 68-pin cable, the SC-2345/2350 carrier offers easy-to-use, rugged, Edition Date: July-2007 URL: http://digital.ni.com/manuals.nsf/websearch/977C8687049A4E7F8625730800636F9B

SC-2345/2350 Carrier User Manual and Specifications
This document describes how to install and configure the SC-2345/2350 carrier. The SC-2345/2350 carrier transfers signals to and from 68-pin E/M Series data acquisition (DAQ) devices, referred to as the DAQ device in this manual. When used with SCC Series modules and a shielded 68-pin cable, the Edition Date: July-2006 URL: http://digital.ni.com/manuals.nsf/websearch/09FC2D464C3C38A1862571850066A88D

SCC Quick Start Guide
This document explains how to install, configure, and set up National Instruments SCC modules. This document assumes you have already installed, configured, and tested the data acquisition (DAQ) device you will connect to the SC-2345/2350 carrier. Edition Date: September-2005 URL: http://digital.ni.com/manuals.nsf/websearch/5587D12C545D7ED9862570600070E302

SCXI-1314T TEDS Bridge Sensor Terminal Block Installation Guide and Specifications
This installation guide describes how to install and use the SCXI-1314T terminal block with the SCXI-1520 module and hardware Transducer Elecrtonic Data Sheet (TEDS)-enabled bridge sensors. Edition Date: August-2004 URL: http://digital.ni.com/manuals.nsf/websearch/99EEE03D2C36ED8A86256EE60063482D

BNC-2096 Installation Guide and Specifications
The BNC-2096 is a 16-channel rack-mount adapter for reading IEEE P1451.4 Transducer Electronic Data Sheet (TEDS) information from Class I TEDS sensors. This installation guide describes how to connect the BNC-2096 in a measurement system. Edition Date: March-2004 URL: http://digital.ni.com/manuals.nsf/websearch/9019B288E1D2791686256E46006E99F8