NI PXI-2597 Specifications
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/5CAA372707600D5B862570D6005B8EE8

NI PXI-2598 Specifications
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/5FE04E88AAED5A8D862570D6005BD6DF

NI PXI-2599 Specifications
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/646411024C6E0FAB862570D6005C35E9

Notice of Specification Change - PXI Connector
This letter to customers explains the new XJ4 connector on PXI modules. This version is for customers who might use the J2 connector. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/92551500B96E296D862570CB00567D92

Notice of Specification Change - PXI Connector
This letter to customers explains the new XJ4 connector on PXI modules. This version is for the majority of PXI customers not affected by the local bus. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/8637A06A6C659B2A862570CB00561270

PXI-8430/8431 8-Channel Hardware Specifications
This document lists the specifications for the PXI-8430 and PXI-8431 8-channel boards. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/6F79B86F7D90B71B862570C8006ABFE9

SCC-A10 Voltage Attenuator Module User Guide and Specifications
The SCC-A10 voltage attenuator module accepts up to two voltage sources of 60 V maximum amplitude and attenuates each voltage by a factor of 10. A differential instrumentation amplifier buffers each input signal. The SCC-A10 contains circuitry capable of protecting E/M Series DAQ devices for input Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/91DE4E5D395AD2C4862570C90057CC85

SCC-AI Series Isolated Analog Input Modules User Guide and Specifications
The SCC-AI Series isolated analog input modules can extract a relatively low-amplitude input signal from a high-common-mode voltage so the E/M Series DAQ device can measure the input signal. They also can amplify and filter the input signal, resulting in higher measurement resolution and accuracy. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/EC8954C20F3FD057862570C900577D66

SCC-AO10 Isolated Analog Output Module User Guide and Specifications
The SCC-AO10 is an isolated voltage output module with an output range of 10 V. The output voltage level is controlled by the DAC output of an E/M Series DAQ device. You can increase the output voltage level to 20 V by connecting two SCC-AO10 modules in series. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/3C8768ADF63D98A6862570C900585591

SCC-CO20 Isolated Current Output Module User Guide and Specifications
The SCC-CO20 is an isolated current output module that outputs up to 20 mA. The output current level is proportional to the voltage applied to the module by an analog output channel of an E/M Series DAQ device. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/5053360E687A369B862570C9005823AF