Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
Manuals

Category(s) Selected [start over]

Edition
: 2002 [remove] ,
Product
: PXI/CompactPCI [remove] ,
1-10 of 44
Manuals [see results below]. To refine your results, select another category.
Product
Bus Interfaces (9)
Chassis (6)
Controllers (4)
Data Acquisition (6)
Machine Vision (1)
Modular Instruments (18)
Timing and Synchronization (1)
Document Type
User Manual (12)
Getting Started (8)
Specifications (12)
Installation Guide (9)
Quick Start Guide (1)
Calibration Procedure (2)
Other (3)

Sort by:
1-10 of 44

Getting Started with Multichassis Synchronization Using the NI PXI-6653 and the NI PXI-4472
This document describes three typical hardware configurations where the NI PXI-6653 (NI 6653) enables synchronization for NI PXI-4472 (NI 4472) Dynamic Signal Acquisition (DSA) modules located in multiple PXI chassis. The necessary hardware, signal connections, and example code are described for Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/DE365B71A102065086256C930065978A

Getting Started with PCI/PXI-8232 for Windows NT 4.0
This card contains instructions for installing the PCI/PXI-8232 software on the Windows NT 4.0 operating system Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/0A884DE3DE16411606256CC600688FB6

Getting Started with PXI-8231 for Windows
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/FF25F260391FF99A06256CC60068335B

Getting Started: PCI/PXI-8232 for Windows
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/18FC726A30BB99FC86256CF60079DACD

NI PXI/PCI-5411/5431 Specifications
This document lists the specifications for the NI PXI/PCI-5411 and the NI PXI/PCI-5431. These specifications are typical at 25 °C unless otherwise stated. The operating temperature range is 0-50 °C. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/8BCB60B78C3D803586256C4D0072419A

NI-Serial for PCI/PXI Installation Guide
This guide includes instructions for installing your PCI/PXI serial hardware and software. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/419B21EBC520068C86256C91007078D6

PXI EMC Filler Panels Installation Guide
This document describes how to install the EMC filler panels in your PXI system. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/A16EABC11CE8142986256C8E0060715E

PXI Slot Blockers Installation Guide
This document describes how to install slot blockers in your PXI system. Use the optional slot blocker kit to improve air flow through peripheral modules by reducing air flow bypass that can occur in unused adjacent peripheral slots. This improved air flow can reduce component temperatures within Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/A300351038516C6C86256C8E006EA18D

NI 660X Register-Level Programmer Manual
The NI 660X Register-Level Programmer Manual describes the programmable features of the National Instruments 660X devices. This document is necessary for programmers who use platforms not supported by NI-DAQ. This manual contains information necessary for the register-level programming of NI 660X Edition Date: November-2002 URL: http://digital.ni.com/manuals.nsf/websearch/4CE1C778F442B01386256C870060F9F3

Note to Embedded Controller Users
This document contains important information regarding recovery of the software on your PXI controller. You can recover an image of the hard disk provided to you in original factory condition at the time of shipment. Edition Date: November-2002 URL: http://digital.ni.com/manuals.nsf/websearch/BAB03F5E7AF8BACF86256C780079D89C

Sort by:
1-10 of 44