Read Me First: Notes to Calibration Executive 2.0 Users
This document provides recommended procedures for uninstalling Calibration Executive 2.0. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/0AA1DE92DEEC2A9B86256CA6005B8120

SCB-68 68-Pin Shielded Connector Block User Manual
This manual describes the SCB-68 and explains how to use the connector block with National Instruments data acquisition (DAQ) devices. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/74C86ADEF0E4813F86256C84007CB3AB

NI 6115/6120 User Manual
This manual describes the electrical and mechanical aspects of the NI 6115/6120 and contains information concerning its operation and programming. Edition Date: November-2002 URL: http://digital.ni.com/manuals.nsf/websearch/F623955E8F936D1886256C7D0072F40E

NI 660X Register-Level Programmer Manual
The NI 660X Register-Level Programmer Manual describes the programmable features of the National Instruments 660X devices. This document is necessary for programmers who use platforms not supported by NI-DAQ. This manual contains information necessary for the register-level programming of NI 660X Edition Date: November-2002 URL: http://digital.ni.com/manuals.nsf/websearch/4CE1C778F442B01386256C870060F9F3

Wire List for the SHC68-NT-S Cable
This document provides the pin assignments for the wires of the SHC68-NT-S cable. Edition Date: November-2002 URL: http://digital.ni.com/manuals.nsf/websearch/BEA28157212DD0C786256F2000573897

CB-27 Connector Block Installation Guide
This installation guide describes how to connect the CB-27 connector block. With the CB-27 connector block, you can easily connect analog and digital signals to National Instruments (NI) 27-pin PCMCIA data acquisition (DAQ) devices. The CB-27 consists of a connector block with 28 screw terminals Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/97CE181527225C4E86256C4F0072E74C

CB-27T, TBX-68T, and CB-68T Isothermal Terminal Blocks Installation Guide
This installation guide describes how to install and connect signals to the CB-27T, TBX-68T, and CB-68T isothermal terminal blocks for use with the NI 435X products, which includes the NI USB-4350 for computers that are USB compatible, NI PCMCIA-4350 for computers that are PCMCIA compatible, NI Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/18FBE283FA69AFE086256C60006FDB3B

NI 435X User Manual
This manual describes the electrical and mechanical aspects of the NI 435X family of instruments and contains information concerning device operation and programming. Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/D660175E72F92C1486256C680080E510

NI 6013/6014 User Manual
The National Instruments 6013/6014 devices are high-performance multifunction analog, digital, and timing I/O devices for PCI. The NI 6014 features 16 channels (eight differential) of 16-bit analog input (AI), two channels of 16-bit analog output (AO), a 68-pin connector, and eight lines of digital Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/7FCCC893F141E3F586256C5A006CDDF9

NI 6052E User Manual
This manual describes the electrical and mechanical aspects of the National Instruments PCI/PXI-6052E and the DAQPad-6052E and contains information about operation and programming. The NI 6052E is a high-performance multifunction analog, digital, and timing I/O device for PCI, PXI, or 1394 bus Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/4BF830B584C7AC8A86256C5D005C02FF