TC-2095 Rack-Mount Terminal Block Calibration Procedure
This document contains step-by-step instructions for verifying the performance of the temperature sensor on the National Instruments TC-2095 rack-mount terminal block. This temperature sensor is for cold-junction compensation of thermocouples on the terminal block. Edition Date: July-2002 URL: http://digital.ni.com/manuals.nsf/websearch/3F5FE7E45B07D59386256BF9007EAC5B

TBX-1303 32-Channel Isothermal Terminal Block Installation Guide and Specifications
This guide describes how to install the National Instruments TBX-1303 32-channel isothermal terminal block and how to use it with SCXI-1100 and SCXI-1102/B/C modules. Edition Date: June-2002 URL: http://digital.ni.com/manuals.nsf/websearch/94ACFC9302959A7A86256BF00066205D

SCXI-1356 Shielded Cable Installation Guide and Specifications
This guide describes how to install the SCXI-1356 shielded cable between a 100-pin VXI-MIO Series module and two SCXI modules. Edition Date: April-2002 URL: http://digital.ni.com/manuals.nsf/websearch/3B41D5A326EA3D7686256B9D00505D71

PXI-1011 Chassis User Manual and Specifications
The PXI-1011 Chassis User Manual describes the features of the PXI-1011 chassis and contains information about configuring the chassis, installing the data acquisition (DAQ) and SCXI modules, and operating the chassis. Edition Date: February-2002 URL: http://digital.ni.com/manuals.nsf/websearch/9B0CE4816DC78B7586256B52006C32BC

SCXI-1351 One-Slot Cable Etxender Installation Guide and Specifications
This guide describes how to install the National Instruments SCXI-1351 one-slot cable extender in an SCXI system. Edition Date: February-2002 URL: http://digital.ni.com/manuals.nsf/websearch/5B4F6CF03C45854986256B7200666214

SCXI-1354 Cable Assembly for the DAQCard-1200 Installation Guide and Specifications
This guide describes how to install the National Instruments (NI) SCXI-1354 cable assembly between an SCXI module and a DAQCard-1200. The SCXI-1354 consists of an SCXI-1341 cable adapter and a 50-pin PR50-50F ribbon cable. The cable attaches the DAQCard-1200 I/O connector to the rear connector of Edition Date: February-2002 URL: http://digital.ni.com/manuals.nsf/websearch/F1075C1D319C738186256B5700628AC5

TBX-1326 High-Voltage Terminal Block Installation Guide and Specifications
This guide describes how to install and use the National Instruments TBX-1326 high-voltage terminal block with the SCXI-1162/HV, SCXI-1163, and SCXI-1163R modules. Edition Date: February-2002 URL: http://digital.ni.com/manuals.nsf/websearch/7020850B919CDC0386256B53005AA1E4

SCXI-1353 Shielded Cable Assembly Installation Guide and Specifications
This guide describes how to install the National Instruments SCXI-1353 shielded cable assembly between a 100-pin E Series data acquisition (DAQ) device and two SCXI modules. The SCXI-1353 consists of an SH1006868 cable, an SCXI-1349 shielded cable adapter, and an AI-48/DIO-24 adapter. Edition Date: January-2002 URL: http://digital.ni.com/manuals.nsf/websearch/F37E03E396228FB386256B5600627D79

TBX-24F Feedthrough Terminal Block Installation Guide
This guide describes how to install and use the National Instruments TBX-24F feedthrough terminal block with an SCXI system. The TBX-24F is a DIN-rail mountable terminal block you can use with any SCXI module. It directly connects to the SCXI-1161, which has internal terminal blocks. It connects to Edition Date: January-2002 URL: http://digital.ni.com/manuals.nsf/websearch/AFA32424A16CA09B86256B3D005DA865